Abstract:An automated microfluidic sequential injection analysis system that efficiently manipulates sample and reagent solutions in the nanoliter range in approximately 10 s per analytical cycle is described. The system consisted of a 6-cm-long, typically 75-microm i.d., fused-silica capillary (which functioned as a sampling probe and reactor as well as a flow-through detection cell), a horizontally oriented waste reservoir that provided liquid level differences for inducing gravity-driven flows, an autosampling device holding samples and reagents with horizontally fixed slotted microvials, and a laser-induced fluorescence detection system. Sample and reagent zones were sequentially introduced via gravity-driven flow by scanning the capillary tip (functioning as the sampling probe) through the vial slots, while vials containing sample, reagent, and carrier were sequentially rotated to the probe by programmed movement of the vial holders. Sequentially injected nanoliter zones were rapidly mixed by convection and diffusion within the carrier flow, demonstrating a behavior that conformed well to the Taylor dispersion model, and zone penetration effects were characterized and optimized under Taylor's dispersion theory guidelines. For the determination of fluorescein, a high throughput of 400 h(-1) was achieved, rapidly producing calibration curves (five points) within 45 s. Owing to its adaptability to the Taylor's dispersion model, the system was used also for measuring diffusion coefficients of fluorescent species. Potentials for using the system in enzyme inhibition assays were demonstrated by a reaction involving the conversion of fluorescein digalactoside to fluorescent hydrolysates via beta-galactosidase and the inhibition of beta-galactosidase by diethylenetriaminepentaacetic acid.

Microfluidic chip-based flow-injection analysis with high throughput sampling interface

High-Throughput Nanoliter Sample Introduction Microfluidic Chip-Based Flow Injection Analysis System with Gravity-Driven Flows

A High-Throughput Continuous Sample Introduction Interface for Microfluidic Chip-Based Capillary Electrophoresis Systems.

High-Throughput Microfluidic Sample Introduction In The Nanoliter To Picoliter Range

A microfluidic flow injection system for DNA assay with fluids driven by an on-chip integrated pump based on capillary and evaporation effects.

[Developments of High-Throughput Microfluidic Sample Introduction Techniques].

Microfluidic Chip-Based Valveless Flow Injection Analysis System with Gravity-Driven Flows.

High-throughput sample introduction for droplet-based screening with an on-chip integrated sampling probe and slotted-vial array.

Sequential injection sample introduction microfluidic-chip based capillary electrophoresis system

Falling-Drop Interface for Continuous Sample Introduction in Microfluidic Chips

Improvements on the electrokinetic injection technique for microfluidic chips

Microfluidic Sequential Injection Analysis in a Short Capillary

An Automated Electrokinetic Continuous Sample Introduction System for Microfluidic Chip-Based Capillary Electrophoresis

The Development of A Compact Microfluidic Chip Analyzer with Continuous Sample Introduction

Fabrication of a Monolithic Sampling Probe System for Automated and Continuous Sample Introduction in Microchip‐based CE

Microfluidic Sequential Injection Analysis System Based on Polydimethylsiloxane (PDMS) Chip with Integrated Pneumatic-Actuated Valves

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Microfabrication of Integrated Capillary Electrophoresis Chips and On-chip Sample Injection and Separation

Development of a Low-Cost Microfluidic Capillary-Electrophoresis System Coupled with Flow-Injection and Sequential-Injection Sample Introduction (Review).

Sample Introduction Techniques For Microfluidic Chip-Based Capillary Electrophoresis

Microfluidic Analysis System Based On Capillary Electrophoresis Chip