Abstract:An automated microfluidic sequential injection analysis system that efficiently manipulates sample and reagent solutions in the nanoliter range in approximately 10 s per analytical cycle is described. The system consisted of a 6-cm-long, typically 75-microm i.d., fused-silica capillary (which functioned as a sampling probe and reactor as well as a flow-through detection cell), a horizontally oriented waste reservoir that provided liquid level differences for inducing gravity-driven flows, an autosampling device holding samples and reagents with horizontally fixed slotted microvials, and a laser-induced fluorescence detection system. Sample and reagent zones were sequentially introduced via gravity-driven flow by scanning the capillary tip (functioning as the sampling probe) through the vial slots, while vials containing sample, reagent, and carrier were sequentially rotated to the probe by programmed movement of the vial holders. Sequentially injected nanoliter zones were rapidly mixed by convection and diffusion within the carrier flow, demonstrating a behavior that conformed well to the Taylor dispersion model, and zone penetration effects were characterized and optimized under Taylor's dispersion theory guidelines. For the determination of fluorescein, a high throughput of 400 h(-1) was achieved, rapidly producing calibration curves (five points) within 45 s. Owing to its adaptability to the Taylor's dispersion model, the system was used also for measuring diffusion coefficients of fluorescent species. Potentials for using the system in enzyme inhibition assays were demonstrated by a reaction involving the conversion of fluorescein digalactoside to fluorescent hydrolysates via beta-galactosidase and the inhibition of beta-galactosidase by diethylenetriaminepentaacetic acid.

Microfluidic Chip-Based Valveless Flow Injection Analysis System with Gravity-Driven Flows.

High-Throughput Nanoliter Sample Introduction Microfluidic Chip-Based Flow Injection Analysis System with Gravity-Driven Flows

A microfluidic flow injection system for DNA assay with fluids driven by an on-chip integrated pump based on capillary and evaporation effects.

Microfluidic chip-based flow-injection analysis with high throughput sampling interface

Microfluidic chip-based flow injection system with gas diffusion separation and photometric detection

Microfluidic Chip-Based Flow Injection System For Gas Diffusion Separation With An Evaporation Pump Drive

Valveless gated injection for microfluidic chip-based liquid chromatography system with polymer monolithic column.

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

A Gravity-Induced Flow Injection System for Surface Plasmon Resonance Biosensor.

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

Microfluidic Sequential Injection Analysis in a Short Capillary

Microfluidic Sequential Injection Analysis System Based on Polydimethylsiloxane (PDMS) Chip with Integrated Pneumatic-Actuated Valves

A gravity driven micro flow injection wetting film extraction system on a polycarbonate chip.

Microfluidic Chip Detection Instrument With High Signal-To-Noise Ratio

A Microfluidic Chip Based Sequential Injection System with Trapped Droplet Liquid-Liquid Extraction and Chemiluminescence Detection

A demountable nanoflow nebulizer for sheathless interfacing nano-high performance liquid chromatography with inductively coupled plasma mass spectrometry

Microflow Injection System for Efficient Cu(II) Detection across a Broad Range

The Development of A Compact Microfluidic Chip Analyzer with Continuous Sample Introduction

The Third Generation of Flow Injection Analysis:Current Situation and Perspectives of Lab-on-Valve Scheme

A High-Throughput Continuous Sample Introduction Interface for Microfluidic Chip-Based Capillary Electrophoresis Systems.

The Use of A Micropump Based on Capillary and Evaporation Effects in A Microfluidic Flow Injection Chemiluminescence System