Abstract:An automated microfluidic sequential injection analysis system that efficiently manipulates sample and reagent solutions in the nanoliter range in approximately 10 s per analytical cycle is described. The system consisted of a 6-cm-long, typically 75-microm i.d., fused-silica capillary (which functioned as a sampling probe and reactor as well as a flow-through detection cell), a horizontally oriented waste reservoir that provided liquid level differences for inducing gravity-driven flows, an autosampling device holding samples and reagents with horizontally fixed slotted microvials, and a laser-induced fluorescence detection system. Sample and reagent zones were sequentially introduced via gravity-driven flow by scanning the capillary tip (functioning as the sampling probe) through the vial slots, while vials containing sample, reagent, and carrier were sequentially rotated to the probe by programmed movement of the vial holders. Sequentially injected nanoliter zones were rapidly mixed by convection and diffusion within the carrier flow, demonstrating a behavior that conformed well to the Taylor dispersion model, and zone penetration effects were characterized and optimized under Taylor's dispersion theory guidelines. For the determination of fluorescein, a high throughput of 400 h(-1) was achieved, rapidly producing calibration curves (five points) within 45 s. Owing to its adaptability to the Taylor's dispersion model, the system was used also for measuring diffusion coefficients of fluorescent species. Potentials for using the system in enzyme inhibition assays were demonstrated by a reaction involving the conversion of fluorescein digalactoside to fluorescent hydrolysates via beta-galactosidase and the inhibition of beta-galactosidase by diethylenetriaminepentaacetic acid.

The Use of A Micropump Based on Capillary and Evaporation Effects in A Microfluidic Flow Injection Chemiluminescence System

A microfluidic flow injection system for DNA assay with fluids driven by an on-chip integrated pump based on capillary and evaporation effects.

Studies On A Micropump Based On Evaporation And Capillary Effects

Fabrication of pneumatic micropump on glass-PDMS microfluidic chip and its application to chemiluminescence detection

A Self-Regulated Microfluidic Device with Thermal Bubble Micropumps

Microfluidic Chip-Based Flow Injection System For Gas Diffusion Separation With An Evaporation Pump Drive

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

Microfluidic Sequential Injection Analysis in a Short Capillary

Microfluidic Chip-Based Valveless Flow Injection Analysis System with Gravity-Driven Flows.

Communication—Evaporation Driven Micro/Nanofluidic Pumping Device

Chemiluminescence micro-flow-injection analysis on a chip.

Capillary Electrophoresis System with Flow Injection Sample Introduction and Chemiluminescence Detection on a Chip Platform.

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Microfluidic chip-based flow injection system with gas diffusion separation and photometric detection

A Microfluidic Chip Based Sequential Injection System with Trapped Droplet Liquid-Liquid Extraction and Chemiluminescence Detection

Microfluidic Reflow Pumps

A Microfluidic Chip Capable of Switching W/O Droplets to Vertical Laminar Flow for Electrochemical Detection of Droplet Contents.

Automated Droplet Ejection from a Digital Microfluidics Sample Pretreatment Device Enables Batch-Mode Chemiluminescence Immunoassay

Experimental fluid dynamics characterization of a novel micropump-mixer

Design and Testing of Micro Fluidic Chemical Analysis Chip Integrated with Micro Valveless Pump

A Minimized Valveless Electromagnetic Micropump for Microfluidic Actuation on Organ Chips