Abstract:An automated microfluidic sequential injection analysis system that efficiently manipulates sample and reagent solutions in the nanoliter range in approximately 10 s per analytical cycle is described. The system consisted of a 6-cm-long, typically 75-microm i.d., fused-silica capillary (which functioned as a sampling probe and reactor as well as a flow-through detection cell), a horizontally oriented waste reservoir that provided liquid level differences for inducing gravity-driven flows, an autosampling device holding samples and reagents with horizontally fixed slotted microvials, and a laser-induced fluorescence detection system. Sample and reagent zones were sequentially introduced via gravity-driven flow by scanning the capillary tip (functioning as the sampling probe) through the vial slots, while vials containing sample, reagent, and carrier were sequentially rotated to the probe by programmed movement of the vial holders. Sequentially injected nanoliter zones were rapidly mixed by convection and diffusion within the carrier flow, demonstrating a behavior that conformed well to the Taylor dispersion model, and zone penetration effects were characterized and optimized under Taylor's dispersion theory guidelines. For the determination of fluorescein, a high throughput of 400 h(-1) was achieved, rapidly producing calibration curves (five points) within 45 s. Owing to its adaptability to the Taylor's dispersion model, the system was used also for measuring diffusion coefficients of fluorescent species. Potentials for using the system in enzyme inhibition assays were demonstrated by a reaction involving the conversion of fluorescein digalactoside to fluorescent hydrolysates via beta-galactosidase and the inhibition of beta-galactosidase by diethylenetriaminepentaacetic acid.

A microfluidic flow injection system for DNA assay with fluids driven by an on-chip integrated pump based on capillary and evaporation effects.

Flow Stabilizer on a Syringe Tip for Hand-Powered Microfluidic Sample Injection

Microfluidic Chip-Based Valveless Flow Injection Analysis System with Gravity-Driven Flows.

High-Throughput Nanoliter Sample Introduction Microfluidic Chip-Based Flow Injection Analysis System with Gravity-Driven Flows

Microfluidic chip-based flow-injection analysis with high throughput sampling interface

The Use of A Micropump Based on Capillary and Evaporation Effects in A Microfluidic Flow Injection Chemiluminescence System

Chemiluminescence micro-flow-injection analysis on a chip.

Microfluidic Sequential Injection Analysis in a Short Capillary

Microfluidic Chip-Based Flow Injection System For Gas Diffusion Separation With An Evaporation Pump Drive

Microfluidic Sequential Injection Analysis System Based on Polydimethylsiloxane (PDMS) Chip with Integrated Pneumatic-Actuated Valves

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Development and characterization of a capillary-flow microfluidic device for nucleic acid detection

A Gravity-Induced Flow Injection System for Surface Plasmon Resonance Biosensor.

A High-Throughput Continuous Sample Introduction Interface for Microfluidic Chip-Based Capillary Electrophoresis Systems.

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

A Simple Automated Microfluidic System For Rapid Capillary Electrophoretic Separation Of Dna Fragments

Sequential injection sample introduction microfluidic-chip based capillary electrophoresis system

A nanoinjector for microanalysis

Development of a Low-Cost Microfluidic Capillary-Electrophoresis System Coupled with Flow-Injection and Sequential-Injection Sample Introduction (Review).

Microfluidic on-chip valve and pump for applications in immunoassays.

The Development of A Compact Microfluidic Chip Analyzer with Continuous Sample Introduction