Abstract:A microfluidic system for introducing nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow was developed, which consisted of a microfluidic chip, a syringe pump, a high voltage power supply, a homemade microflow nebulizer and a heated single pass spray chamber. In the microfluidic chip, the sample in the reservoir S automatically flew across the intersection P-1 to the reservoir SR under hydrodynamic pressure. Two porous polymer plugs C-1 and C-2 were created on the microchip to isolate electrokinetic flow from the pressure-driven flow. Once a high voltage between S and buffer reservoir B was applied, the sample was driven through the porous polymer plug C-1 into the metering channel by electrokinetic force. Simply changing the sampling time can freely optimize the sampling volume down to 0.18 nL, which was injected into the nebulizer by the pressure-driven makeup solution. The nanolitre sample introducing system has the advantages of low sample consumption, satisfactory precision, low sampling dead volume (0.38 nL) and low sampling dead time (0.42 s). The proposed system was successfully applied to determine platinum content in a serum sample of a cancer patient on cisplatin chemotherapy. The sample consumption of 1.8 nL was about 10(5) times less than that with the conventional sampling system. The sample throughput up to 112 h(-1) could be achieved with the detection limit of 64 ng L-1 for Pt-195. The content of Pt in the sample was 8.4 +/- 0.3 mu g L-1, agreeing well with that (8.5 +/- 0.3 mu g L-1) determined by the conventional sampling system.

Flow Stabilizer on a Syringe Tip for Hand-Powered Microfluidic Sample Injection

Inertial Microfluidic Syringe Cell Concentrator.

An Air-Chamber-based Microfluidic Stabilizer for Attenuating Syringe-Pump-induced Fluctuations

Low-cost Multi-Core Inertial Microfluidic Centrifuge for High-Throughput Cell Concentration

Hand-powered microfluidics: A membrane pump with a patient-to-chip syringe interface

A compact modularized power-supply system for stable flow generation in microfluidic devices

Improved hydrostatic pressure sample injection by tilting the microchip towards the disposable miniaturized CE device.

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

A Hydrostatic Pressure-Driven Passive Micropump Enhanced with Siphon-Based Autofill Function.

From Microfluidic Paper-Based Analytical Devices to Paper-Based Biofluidics with Integrated Continuous Perfusion.

A microfluidic flow injection system for DNA assay with fluids driven by an on-chip integrated pump based on capillary and evaporation effects.

A nanoinjector for microanalysis

A Lab-in-a-droplet Bioassay Strategy for Centrifugal Microfluidics with Density Difference Pumping, Power to Disc and Bidirectional Flow Control.

A Simple And Reliable Configuration With Needle Valve For Manipulating Flow In Microfluidic Chip

Improvements on the electrokinetic injection technique for microfluidic chips

Droplet-based microfluidic flow injection system with large-scale concentration gradient by a single nanoliter-scale injection for enzyme inhibition assay.

A high-precision automated liquid pipetting device with an interchangeable tip

A Smartphone Controlled Handheld Microfluidic Liquid Handling System

A Multi-Pump Magnetohydrodynamics Lab-On-A-Chip Device for Automated Flow Control and Analyte Delivery

Self-Propelled and Electrobraking Synergetic Liquid Manipulator toward Microsampling and Bioanalysis

Microfluidic Sequential Injection Analysis System Based on Polydimethylsiloxane (PDMS) Chip with Integrated Pneumatic-Actuated Valves