Abstract:An automated microfluidic sequential injection analysis system that efficiently manipulates sample and reagent solutions in the nanoliter range in approximately 10 s per analytical cycle is described. The system consisted of a 6-cm-long, typically 75-microm i.d., fused-silica capillary (which functioned as a sampling probe and reactor as well as a flow-through detection cell), a horizontally oriented waste reservoir that provided liquid level differences for inducing gravity-driven flows, an autosampling device holding samples and reagents with horizontally fixed slotted microvials, and a laser-induced fluorescence detection system. Sample and reagent zones were sequentially introduced via gravity-driven flow by scanning the capillary tip (functioning as the sampling probe) through the vial slots, while vials containing sample, reagent, and carrier were sequentially rotated to the probe by programmed movement of the vial holders. Sequentially injected nanoliter zones were rapidly mixed by convection and diffusion within the carrier flow, demonstrating a behavior that conformed well to the Taylor dispersion model, and zone penetration effects were characterized and optimized under Taylor's dispersion theory guidelines. For the determination of fluorescein, a high throughput of 400 h(-1) was achieved, rapidly producing calibration curves (five points) within 45 s. Owing to its adaptability to the Taylor's dispersion model, the system was used also for measuring diffusion coefficients of fluorescent species. Potentials for using the system in enzyme inhibition assays were demonstrated by a reaction involving the conversion of fluorescein digalactoside to fluorescent hydrolysates via beta-galactosidase and the inhibition of beta-galactosidase by diethylenetriaminepentaacetic acid.

A gravity driven micro flow injection wetting film extraction system on a polycarbonate chip.

A Microfluidic Chip Based Liquid–liquid Extraction System with Microporous Membrane

Microfluidic Chip-Based Liquid-Liquid Extraction and Preconcentration Using A Subnanoliter-Droplet Trapping Technique

A Microfluidic Chip Based Sequential Injection System with Trapped Droplet Liquid-Liquid Extraction and Chemiluminescence Detection

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Microstructure-Enhanced Liquid–Liquid Extraction in a Real-Time Fluorescence Detection Microfluidic Chip

High-Throughput Nanoliter Sample Introduction Microfluidic Chip-Based Flow Injection Analysis System with Gravity-Driven Flows

Stopped-flow liquid-liquid extraction on microfluidic chips

Microfluidic Liquid-Liquid Extraction System Based on Stopped-Flow Technique and Liquid Core Waveguide Capillary

Fabrication of a Monolithic Sampling Probe System for Automated and Continuous Sample Introduction in Microchip‐based CE

In-Channel Modification of Biosensor Electrodes Integrated on A Polycarbonate Microfluidic Chip for Micro Flow-Injection Amperometric Determination of Glucose

A High-Throughput Continuous Sample Introduction Interface for Microfluidic Chip-Based Capillary Electrophoresis Systems.

Microfluidic Chip-Based Valveless Flow Injection Analysis System with Gravity-Driven Flows.

Fabrication of a polystyrene microfluidic chip coupled to electrospray ionization mass spectrometry for protein analysis.

An Integrated Plastic Microchip for Enhancing Electrophoretic Separation Using Tunable Pressure-Driven Backflows.

Microfluidic chip-based liquid-liquid extraction and preconcent ~ tion using a novel droplet trapping technique

Liquid Chromatography on a Monolithic Column Microfluidic Chip Coupled with "Three-T" Sample Injection Mode and Amperometric Detection.

A Simple Microfluidic Chip Design for Fundamental Bioseparation.

A Chip-based Capillary Electrophoresis System for High-efficiency Bioanalysis

Microfluidic Sequential Injection Analysis in a Short Capillary

Laminar Flow Mediated Continuous Single-Cell Analysis on a Novel Poly(dimethylsiloxane) Microfluidic Chip.