Abstract:An automated microfluidic sequential injection analysis system that efficiently manipulates sample and reagent solutions in the nanoliter range in approximately 10 s per analytical cycle is described. The system consisted of a 6-cm-long, typically 75-microm i.d., fused-silica capillary (which functioned as a sampling probe and reactor as well as a flow-through detection cell), a horizontally oriented waste reservoir that provided liquid level differences for inducing gravity-driven flows, an autosampling device holding samples and reagents with horizontally fixed slotted microvials, and a laser-induced fluorescence detection system. Sample and reagent zones were sequentially introduced via gravity-driven flow by scanning the capillary tip (functioning as the sampling probe) through the vial slots, while vials containing sample, reagent, and carrier were sequentially rotated to the probe by programmed movement of the vial holders. Sequentially injected nanoliter zones were rapidly mixed by convection and diffusion within the carrier flow, demonstrating a behavior that conformed well to the Taylor dispersion model, and zone penetration effects were characterized and optimized under Taylor's dispersion theory guidelines. For the determination of fluorescein, a high throughput of 400 h(-1) was achieved, rapidly producing calibration curves (five points) within 45 s. Owing to its adaptability to the Taylor's dispersion model, the system was used also for measuring diffusion coefficients of fluorescent species. Potentials for using the system in enzyme inhibition assays were demonstrated by a reaction involving the conversion of fluorescein digalactoside to fluorescent hydrolysates via beta-galactosidase and the inhibition of beta-galactosidase by diethylenetriaminepentaacetic acid.

The Third Generation of Flow Injection Analysis:Current Situation and Perspectives of Lab-on-Valve Scheme

Meso-microfluidics control technique: lab-on-valve--the third generation of flow injection

Direct Processing and Analysis of Solid and Other Complex Samples with Automatic Flow Injection Systems

FLow-injection analysis: a new approach to quantitative measurements in clinical chemistry.

Trends of Flow Injection Sample Pretreatment Approaching the New Millennium

Microfluidic Chip-Based Valveless Flow Injection Analysis System with Gravity-Driven Flows.

Developments in Flow Injection—Capillary Electrophoresis Systems

New Applications of Flow Injection Micro-column On-line Preconcentration Coupled with Atomic Spectrometry

New Developments in Flow Injection Vapor Generation Atomic Absorption Spectrometry

The Automation of Pharmaceutical Analysis Using Sequential-Injection Techniques

Flow-Injection Methods in Water Analysis—Recent Developments

Valveless gated injection for microfluidic chip-based liquid chromatography system with polymer monolithic column.

On-line Separation and Preconcentration in Flow Injection Analysis

Microfluidic Sequential Injection Analysis System Based on Polydimethylsiloxane (PDMS) Chip with Integrated Pneumatic-Actuated Valves

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Continuous Monitoring in Drug Dissolution Testing Using Flow Injection Systems

New Developments in Flow Injection Separation and Preconcentration Techniques for Electrothermal Atomic Absorption Spectrometry

High-Throughput Nanoliter Sample Introduction Microfluidic Chip-Based Flow Injection Analysis System with Gravity-Driven Flows

A Review of Inline Infrared and Nuclear Magnetic Resonance Applications in Flow Chemistry

Microfluidic Sequential Injection Analysis in a Short Capillary