Abstract:An automated microfluidic sequential injection analysis system that efficiently manipulates sample and reagent solutions in the nanoliter range in approximately 10 s per analytical cycle is described. The system consisted of a 6-cm-long, typically 75-microm i.d., fused-silica capillary (which functioned as a sampling probe and reactor as well as a flow-through detection cell), a horizontally oriented waste reservoir that provided liquid level differences for inducing gravity-driven flows, an autosampling device holding samples and reagents with horizontally fixed slotted microvials, and a laser-induced fluorescence detection system. Sample and reagent zones were sequentially introduced via gravity-driven flow by scanning the capillary tip (functioning as the sampling probe) through the vial slots, while vials containing sample, reagent, and carrier were sequentially rotated to the probe by programmed movement of the vial holders. Sequentially injected nanoliter zones were rapidly mixed by convection and diffusion within the carrier flow, demonstrating a behavior that conformed well to the Taylor dispersion model, and zone penetration effects were characterized and optimized under Taylor's dispersion theory guidelines. For the determination of fluorescein, a high throughput of 400 h(-1) was achieved, rapidly producing calibration curves (five points) within 45 s. Owing to its adaptability to the Taylor's dispersion model, the system was used also for measuring diffusion coefficients of fluorescent species. Potentials for using the system in enzyme inhibition assays were demonstrated by a reaction involving the conversion of fluorescein digalactoside to fluorescent hydrolysates via beta-galactosidase and the inhibition of beta-galactosidase by diethylenetriaminepentaacetic acid.

Continuous Monitoring in Drug Dissolution Testing Using Flow Injection Systems

Automated Continuous Monitoring of Drug Dissolution Process Using a Flow Injection On-Line Dialysis Sampling – Solvent Extraction Separation Spectrophotometric System

Trends of Flow Injection Sample Pretreatment Approaching the New Millennium

Sequential-injection System for Drug-Dissolution Studies of Ibuprofen Tablets and Sustained-Release Formulations

Direct Processing and Analysis of Solid and Other Complex Samples with Automatic Flow Injection Systems

Developments in Flow Injection—Capillary Electrophoresis Systems

Design and Qualification of a Dissolution Sampler with High-Speed and High-Accuracy

Time-Lapse Macro Imaging with Dissolution Tests for Exploring the Interrelationship Between Disintegration and Dissolution Behaviors of Solid Dosages

Simultaneous Monitoring of Aspirin, Phenacetin and Caffeine in Compound Aspirin Tablets Using A Sequential Injection Drug-Dissolution Testing System with Partial Least Squares Calibration

FLow-injection analysis: a new approach to quantitative measurements in clinical chemistry.

Combination of flow injection with capillary electrophoresis. Part I. The basic system

The Third Generation of Flow Injection Analysis:Current Situation and Perspectives of Lab-on-Valve Scheme

Microfluidic Sequential Injection Analysis in a Short Capillary

New Applications of Flow Injection Micro-column On-line Preconcentration Coupled with Atomic Spectrometry

Microfluidic chip-based flow-injection analysis with high throughput sampling interface

A New Flow Injection Single-Standard Calibration Method for Flame Atomic Absorption Spectrometry Based on Dilution by Microsample Dispersion

Analysis of Samples with High Dissolved Solids Content Using Flow-Injection Flame Atomic-Absorption Spectrometry

Flow-Injection Methods in Water Analysis—Recent Developments

The Automation of Pharmaceutical Analysis Using Sequential-Injection Techniques

Studies on the Chemical Kinetics in Flow Injection Analysis System