Abstract:An automated microfluidic sequential injection analysis system that efficiently manipulates sample and reagent solutions in the nanoliter range in approximately 10 s per analytical cycle is described. The system consisted of a 6-cm-long, typically 75-microm i.d., fused-silica capillary (which functioned as a sampling probe and reactor as well as a flow-through detection cell), a horizontally oriented waste reservoir that provided liquid level differences for inducing gravity-driven flows, an autosampling device holding samples and reagents with horizontally fixed slotted microvials, and a laser-induced fluorescence detection system. Sample and reagent zones were sequentially introduced via gravity-driven flow by scanning the capillary tip (functioning as the sampling probe) through the vial slots, while vials containing sample, reagent, and carrier were sequentially rotated to the probe by programmed movement of the vial holders. Sequentially injected nanoliter zones were rapidly mixed by convection and diffusion within the carrier flow, demonstrating a behavior that conformed well to the Taylor dispersion model, and zone penetration effects were characterized and optimized under Taylor's dispersion theory guidelines. For the determination of fluorescein, a high throughput of 400 h(-1) was achieved, rapidly producing calibration curves (five points) within 45 s. Owing to its adaptability to the Taylor's dispersion model, the system was used also for measuring diffusion coefficients of fluorescent species. Potentials for using the system in enzyme inhibition assays were demonstrated by a reaction involving the conversion of fluorescein digalactoside to fluorescent hydrolysates via beta-galactosidase and the inhibition of beta-galactosidase by diethylenetriaminepentaacetic acid.

Meso-microfluidics control technique: lab-on-valve--the third generation of flow injection

The Third Generation of Flow Injection Analysis:Current Situation and Perspectives of Lab-on-Valve Scheme

Microfluidic chip-based flow-injection analysis with high throughput sampling interface

Microfluidic Chip-Based Valveless Flow Injection Analysis System with Gravity-Driven Flows.

Direct Processing and Analysis of Solid and Other Complex Samples with Automatic Flow Injection Systems

Fluidic Control System Employing Micropump and Microvalves for Cell Isolation

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Microfluidic Sequential Injection Analysis System Based on Polydimethylsiloxane (PDMS) Chip with Integrated Pneumatic-Actuated Valves

Microfluidic Sequential Injection Analysis in a Short Capillary

A microfluidic flow injection system for DNA assay with fluids driven by an on-chip integrated pump based on capillary and evaporation effects.

Trends of Flow Injection Sample Pretreatment Approaching the New Millennium

Whole flow field digital particle image velocimetry technology for microfluidic device

Micro-piv based miro flow visualization technology

Improvements on the electrokinetic injection technique for microfluidic chips

Application Development of Microfluidic Chip in Clinical Analysis

Recent progress of microfluidic sample preparation techniques

High-Throughput Nanoliter Sample Introduction Microfluidic Chip-Based Flow Injection Analysis System with Gravity-Driven Flows

Liquid Dynamic Mass Flow Controller

[Developments of High-Throughput Microfluidic Sample Introduction Techniques].

A Control System Design for Nanoparticle Manufacturing by Using Impinging-Jet Micromixers

Recent Advances in Microfluidics Combined with Mass Spectrometry: Technologies and Applications