Abstract:A millisecond mixing process for liquids was implemented using a new mixer design, i.e., a jet nozzle connected with a trumpet-shaped module. The jet nozzle can facilitate two or three liquid channels, performing an initial impingement mixing of liquid sheets in the thickness at millimeters. Then, the joint liquids sheet out of the jet nozzle was stretched thinner and thinner on the expanded solid surface of the trumpet-shaped module, which significantly intensified the liquid mixing process. Accordingly, dual controls on the liquid mixing can be accomplished flexibly by optimizing the operating conditions and the module configuration. Experiments were carried out to investigate the influencing factors on the mixing performance, where the planar laser induced fluorescence (PLIF) technique was used to measure the mass transport of fluorescent dye between the liquids. The intensity of segregation (IOS) and 95% mixing time (τ95) were employed to characterize the mixing performance. The results showed that the module with a greater curvature surface possessed a better mixing performance owing to the rapid reduction of the liquid sheet thickness, which strengthened the mixing process in the lateral direction along the flow development. The mixing behaviors are greatly influenced by the flow rate ratio between the liquids. An optimum mixing state could be achieved when QS1/QS2 is 1:1. An increase of QT under the same flow rate ratio does not affect the mixing pattern in space, but the corresponding τ95 is almost linearly shortened. By splitting one liquid stream into two surrounding streams, the so called Sandwich operation brought further improved mixing performance compared with the two liquids mixing process. Using the novel jet nozzle design, millisecond(s) mixing of liquids can be easily achieved with flexible control.

A Control System Design for Nanoparticle Manufacturing by Using Impinging-Jet Micromixers

Effect of Ultrasonic Intensification on Synthesis of Nano-Sized Particles with an Impinging Jet Reactor

Shear Turbulence Controllable Synthesis of Aggregated Nano-Particles Using a Swirling Vortex Flow Reactor Assisted by Ultrasound Irradiation

Inertial Particle Focusing and Spacing Control in Microfluidic Devices

Intensification of liquid mixing and local turbulence using a fractal injector with staggered conformation

The coupled mixing action of the jet mixer and swirl mixer: An novel static micromixer

Controllability and Flexibility in Particle Manufacturing of a Segmented Microfluidic Device with Passive Picoinjection

Jet mixing optimization using a bio-inspired evolution of hardware and control

Computational-Aided Approach for the Optimization of Microfluidic-Based Nanoparticles Manufacturing Process

Controllable Preparation of Particles with Microfluidics

Control of Mixing with Micro Injectors for Combustion Application

Reactive mixing performance for a nanoparticle precipitation in a swirling vortex flow reactor

Facile and Scalable Rotation-Based Microfluidics for Controllable Production of Emulsions, Microparticles, and Microfibers

Micromixing performance of nanoparticle suspensions in a micro-sieve dispersion reactor

Full-cycle study on developing a novel structured micromixer and evaluating the nanoparticle products as mRNA delivery carriers

Study on the Technology of Monodisperse Droplets by a High-Throughput and Instant-Mixing Droplet Microfluidic System

Numerical study of the mixing of micron particles in a vane mixer

The Design and Evaluation of a High-Speed Jet Dispenser Driven by Single Piezoelectric Stack

A Micro-Capillary Jetting Technology for Liquid-Liquid Microdispersion with Narrow Size Distribution

Millisecond mixing of liquids using a novel jet nozzle