Abstract:As an important pre-treatment part of the micro-total analysis system, the micromixer that ensures the uniform mixing of samples and reagents in a short distance is essential for the improvement of the detection accuracy. Here, a type of passive planar micromixer with narrow gaps and obstacles arranged in the mixing units is proposed. The mixer utilizes the micro-jets and bent baffles to split and recombine streams and promote vortex formation, which breaks the laminar flow when the Reynolds number (Re) varies from 0.1 to 50. The performance of the unoptimized mixer decreases first and then increases with the increase of Re. However, a poor mixing quality is found in the range of 0.5 ≤ Re ≤ 15. To surmount the above shortcomings, a comprehensive geometrical study is performed on this micromixer and the effects of various parameters such as the width and length of the gap, the shape of the baffle, and mixing unit on the mixing quality and pressure drop are analyzed. The results show that the reduction of gap width and the increase of the gap length result in the improvement of mixing efficiency. The staggered Z-shaped baffles accelerate the mixing process compared to traditional V-shaped baffles owing to asymmetric flow and vortex, which leads to excellent mixing. The results also show that the octagonal mixing unit increases mixing efficiency without basically changing pressure drop because the progressive and tapered structure enhances the convection. Lastly, a novel micromixer whose mixing performance is close to 0.8 at Re = 0.5 at the short distance of 2800 µm is proposed, fabricated and tested. This work provides a reference for the development of high-efficiency mixers in the pre-processing part of the micro-total analysis system.

The coupled mixing action of the jet mixer and swirl mixer: An novel static micromixer

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Effect of Ultrasonic Intensification on Synthesis of Nano-Sized Particles with an Impinging Jet Reactor

Performance Evaluation and Scale-Up Behavior of an Engineered In-Line Mixer for 3D Printing

A Control System Design for Nanoparticle Manufacturing by Using Impinging-Jet Micromixers

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Using in-line static mixers to intensify gas–liquid mass transfer processes

Design and Experimental Study of Staggered Oriented Ridges Micromixers

Staggered Oriented Ridges Micromixer Based on Chaotic Advection

The Numerical Simulation of a New Double Swirl Static Mixer for Gas Reactants Mixing

Micromixing Simulation of Novel Large-Double-Blade Impeller

The structure-effect relationship between inline high shear mixers and micromixing: Experiment and CFD simulation

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Mixing in a co-flow-focusing structured droplet-based micromixer

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

Design and Evaluation of an Easily Fabricated Micromixer with Three-Dimensional Periodic Perturbation

Numerical and experimental investigation of mixing enhancement in the passive planar mixer with bent baffles

Mixing enhancement of the passive microfluidic mixer with J-shaped baffles in the tee channel

Numerical study of the mixing of micron particles in a vane mixer

Numerical study of a novel electroosmotic active micromixer with twin diamond-shaped chambers and sawteeth