Abstract:A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting–recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting–recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

Numerical Analysis on a Passive Chaotic Micromixer with Helical Microchannel

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Numerical Simulation of the Scalar Mixing Characteristics in Three-dimensional Microchannels

Research on the Mechanism of Diffusion and Mixing in the Microchannel Flow and Micromixer

Research on the Mixing Characteristic in S-shaped Micro-channel

Numerical Investigation of Flow Patterns and Mixing Characteristics in a 3D Micromixer with Helical Elements over Wide Reynolds Numbers

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Study on the mixing of fluid in curved microchannels with heterogeneous surface potentials

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Numerical Simulation and Structural Recombination of Microchannel Micromixer for Excellent Mixing Performance

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Experimental Research On Mixing Efficiency Of Magnetic Micromixer

Numerical Investigation of Flow Patterns and Mixing Characteristics in a 3D Micromixer with Helical Elements over Wide Reynolds Numbers (adv. Theory Simul. 5/2023)

Theoretical And Experimental Aanalysis Of Chaotic Mixing Efficiency Of Plug Flow In Different Geometry

Design and Performance of Micromixer in Microchannel

Passive Micromixers with Dual Helical Channels

Numerical investigation of mixing improvement in a novel spiral microchannel with baffles

A Three-Dimensional Micromixer Using Oblique Embedded Ridges