Abstract:Understanding the flow fields at the micro-scale is key to developing methods of successfully mixing fluids for micro-scale applications. This paper investigates flow characteristics and mixing efficiency of three different geometries in micro-channels. The geometries of these channels were rectangular with a dimension of; 300μm wide, 100μm deep and 50mm long. In first channel there was no obstacle and in the second channel there were rectangular blocks of dimension 300μm long and 150μm wide are placed in the flow fields with every 300μm distance attaching along the channel wall. In the third geometry, there were 100μm wide fins with 150° angle which were placed at a distance of 500μm apart from each other attached with the wall along the 50mm channel. Fluent software of Computational Fluid Dynamics (CFD) was used to investigate the flow characteristics within these microfluidic model for three different geometries. A species 2D model was created for three geometries and simulations were run in order to investigate the mixing behaviour of two different fluid with viscosity of water (1mPas). Models were only built to investigate the effect of geometry, therefore only one fluid with similar viscosity was used in these models. Velocity vector plots were used in the CFD analysis to visualise the fluid flow path. Mass fractions of fluid were used to analyse the mixing efficiency. Two different colours for water were used to simulate the effect of two different fluids. The results showed that the mixing behaviour strongly depended on the channel geometry when other parameters such as fluid inlet velocity, viscosity and pressure of fluids were kept constant. In two geometries lateral pressure and swirling vortexes were developed which provided better mixing results. Creation of swirling vortexes increased diffusion gradients which enhanced diffusive mixing.

Research on the Mixing Characteristic in S-shaped Micro-channel

Numerical and Experimental Investigation of Mixing Characteristics in the Constructal Tree-Shaped Microchannel

Mixing in T-shaped Micro-Channel Network

Numerical Simulation of the Scalar Mixing Characteristics in Three-dimensional Microchannels

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Study on the mixing of fluid in curved microchannels with heterogeneous surface potentials

Numerical Simulation of the Efficiency of Mixing in Heterogeneous Microchannels with Patterned Surface Potentials

Research on the Mechanism of Diffusion and Mixing in the Microchannel Flow and Micromixer

Mixing Efficiency Analysis On Droplet Formation Process In Microchannels By Numerical Methods

Numerical Analysis on a Passive Chaotic Micromixer with Helical Microchannel

A numerical study on liquid mixing in multichannel micromixers

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Effects of Structural Parameters on Fluid Flow and Mixing Performance in A Curved Microchannel with Gaps and Baffles

An Investigation of Flow Patterns and Mixing Characteristics in a Cross-Shaped Micromixer within the Laminar Regime

Passive Mixing and the Flow Characteristic of a H-Type Microchannel

Optimal Analysis Of The Hydraulic And Mixing Performances Of Symmetric T-Shaped Rectangular Microchannel Mixer

Design and Performance of Micromixer in Microchannel

Numerical analysis of a microfluidic mixer and the effects of different cross-sections and various input angles on its mixing performance

Effect of micro-channel geometry on fluid flow and mixing