Abstract:Abstract The micromix combustion concept offers an elegant compromise between premixed and nonpremixed combustion. By mixing the fuel and air at the smallest scale possible, one can achieve NOx emissions comparable to premixed combustion while removing the risks of auto-ignition and flashback. Current literature reports multiple micromix designs that achieve low NOx emissions (<10 ppm) with hydrogen or hydrogen-rich fuels at combustor inlet temperatures (CIT) representative of low to medium pressure ratio gas turbines (<650 K). This paper seeks to bridge the gap between current literature and the design requirements of highly recuperated ceramic gas turbines, which should allow low NOx operation with various fuels at combustor inlet temperatures upwards of 900 K. To this end, micromix injection nozzles were designed and tested at small scale to investigate the effects of fuel composition and inlet temperature on combustion stability and NOx emissions. The nozzles were additively manufactured in Inconel 625 having hundreds of holes as small as 0.25 mm. An axial swirler is used to induce recirculation of the products behind the nozzle, which helps stabilize combustion with hydrocarbon fuels due to their longer reaction times and slower flame speeds. Experimental results show that NOx emissions can be decreased down to premixed levels if the jet Damköhler number is kept under a critical value, which requires increasingly smaller holes or higher jet velocities as the inlet temperature increases. Combustion instabilities are observed at low inlet temperatures with hydrocarbons, which are also correlated to the jet Damköhler number.

Control of Mixing with Micro Injectors for Combustion Application

Control of mixing with micro injectors for combustion application

Fractal Injectors to Intensify Liquid-Phase Processes by Controlling the Turbulent Flow Field

Intensification of liquid mixing and local turbulence using a fractal injector with staggered conformation

Experimental Analysis in Dynamics Characteristics of Impinging Spray by a PFI Injector : from Spray Atomization to Fuel Adhesion Formation

A Control System Design for Nanoparticle Manufacturing by Using Impinging-Jet Micromixers

Fuel Injection by a Thermal Microinjector

Synthesis of Scalable Micro-Droplets with Heat-Driven Effect in Flow-Focusing Device.

A Microinjector Free of Satellite Drops and Characterization of the Ejected Droplets

Experiments on H2/air premixed combustion in a micro Laval nozzle

Optimal Control of Turbulent Premixed Combustion Instability with Annular Micropore Air Jets

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Injection of Viscous Micro-Droplet via Nozzle-Driven Piezoelectric Micro-Jet and Its Performance Control Method

Characterization of droplet injection process of a microinjector

Experimental Research on Using CO2-Ar Microjets to Control Liquid Fuel Combustion Instability and Pollutant Emission

Dilution Effects of CO2, Ar, N2 and He Microjets on the Combustion Dynamic and Emission Characteristics of Unsteady Premixed Flame

Jet mixing optimization using a bio-inspired evolution of hardware and control

Spray combustion characteristics of a gas–liquid pintle injector with variable swirl intensities

Micro-Mixing Combustion for Highly Recuperated Gas Turbines: Effects of Inlet Temperature and Fuel Composition on Combustion Stability and NOx Emissions

A novel microinjector with virtual chamber neck

Application of Narrow Cone Angle Injectors to Achieve Advanced Compression Ignition on a Mass-Production Diesel Engine - Control Strategy and Engine Performance Evaluation