Abstract:International Journal of Engine Research, Ahead of Print. Fuel spray modeling plays a critical role during modern gasoline direct injection (GDI) engine development due to fuel injection's dominant impact on engine performance and emissions as well as the complex physical processes involved. In engineering three-dimensional (3D) computational fluid dynamics (CFD) simulations, the liquid-phase fuel atomization, evaporation, and mixing are usually modeled with the discrete droplet model (DDM) adopting a Lagrangian approach for multiphase CFD simulations. To this end, general practices heavily depend on the reduced order characterization of the injector nozzle flow. However, such simplified injector modeling may lead to insufficient representations of the complex spray dynamics. To tackle this problem, this study proposes a novel workflow to numerically evaluate GDI sub-cooled and flash-boiling sprays under engine-relevant conditions using a side-mounted GDI injector together with real gasoline fuel properties. The workflow introduces a one-way coupling (OWC) method leveraging high-fidelity nozzle flow simulations to provide realistic boundary conditions to the Lagrangian injector model. The proposed workflow was first verified in a constant volume chamber (CVC) environment and then implemented in a practical GDI engine setup to study spray morphology, fuel-air mixing, and wall-wetting propensity. In addition, detailed comparison was performed between the OWC method and the conventional rate of injection (ROI) routine. Quantitative analysis of spray characteristics was conducted to highlight possible source of discrepancies of the conventional ROI method.

Fuel Injection by a Thermal Microinjector

Experimental Analysis in Dynamics Characteristics of Impinging Spray by a PFI Injector : from Spray Atomization to Fuel Adhesion Formation

Study on injection characteristics of diesel and DME

Control of mixing with micro injectors for combustion application

A Microinjector Free of Satellite Drops and Characterization of the Ejected Droplets

Characterization of droplet injection process of a microinjector

A novel microinjector with virtual chamber neck

An Experimental and Numerical Study on the Cavitation and Spray Characteristics of Micro-Orifice Injectors under Low-Pressure Conditions

Spray Dynamics of High Pressure Fuel Injectors for DI Gasoline Engines

Realistic fuel spray modeling for gasoline direct injection engine applications

Characterization of Direct-Injection Gasoline Sprays under Different Ambient and Fuel Injection Conditions

A Phenomenological Thermal Spray Wall Interaction Modeling Framework Applied to A High Temperature Ignition Assistant Device

Spray and dynamic heat transfer induced by 2-methylfuran transient spray impingement on piston surface

A morphological study of supercritical fuel flash-boiling spray

Experimental Investigation on the Macroscopic and Microscopic Spray Characteristics of Dieseline Fuel

Microscopic Study on the Mechanisms for Formation of the Initial Spray Morphology

Effect of Injection Dynamic Behavior on Fuel Spray Penetration of Common-Rail Injector

Initial Dynamic Development of Fuel Spray Analyzed by Ultra High Speed Imaging

Study on spray characteristics of micro-nano bubble premixed fuel

Evaluation of friction heating in cavitating high pressure Diesel injector nozzles