Abstract:The development of efficient sample introduction and pretreatment systems for microfluidic chip-based analytical systems is important for their application to real-life samples. In this work, world-to-chip interfacing was achieved by a novel flow-through sampling reservoir featuring a guided overflow design. The flow-through reservoir was fabricated on a 30 x 60 x 3 mm planar glass chip of crossed-channel design used for capillary electrophoresis separations. The 20-microL sample reservoir was produced from a section of plastic pipet tip and fixed at one end of the sampling channel. Sample change was performed by pumping 80-microL samples sandwiched between air segments at approximately 0.48 mL/min flow rate through the flow-through reservoir, introduced from an access hole on the bottom side of the chip. A filter paper collar wrapped tightly around the reservoir guided the overflowing sample solution into a plastic trough surrounding the reservoir and then to waste. The performance of the system was demonstrated in the separation and determination of FITC-labeled arginine, glycine, phenylalanine, and glutamic acid with LIF detection, by continuously introducing a train of different samples through the system without electrical interruption. Employing a separation channel of 4 cm (2-cm effective separation length) and 1.4-kV separation voltage, maximum throughputs of 80/h were achieved with <4.1% carryover and precisions ranging from 1.5% for arginine to 2.6% RSD (n = 11) for glycine. The sampling system was tested in the continuous monitoring of the derivatizing process of amino acids by FITC over a period of 4 h, involving 166 analytical cycles. An outstanding overall precision of 4.8% RSD (n = 166) was achieved for the fluorescein internal standard.

High-throughput sample introduction for droplet-based screening with an on-chip integrated sampling probe and slotted-vial array.

High-Throughput Microfluidic Sample Introduction In The Nanoliter To Picoliter Range

High-throughput Droplet Analysis and Multiplex DNA Detection in the Microfluidic Platform Equipped with a Robust Sample-Introduction Technique.

Microfluidic chip-based flow-injection analysis with high throughput sampling interface

A High-Throughput Continuous Sample Introduction Interface for Microfluidic Chip-Based Capillary Electrophoresis Systems.

Nanoliter-scale liquid metering and droplet generation based on a capillary array for high throughput screening

[Developments of High-Throughput Microfluidic Sample Introduction Techniques].

Automated microfluidic screening assay platform based on DropLab.

Fabrication of a Monolithic Sampling Probe System for Automated and Continuous Sample Introduction in Microchip‐based CE

Droplet microfluidic technology for single-cell high-throughput screening

Forming a Large-Scale Droplet Array in a Microcage Array Chip for High-Throughput Screening

Droplet-based microfluidic flow injection system with large-scale concentration gradient by a single nanoliter-scale injection for enzyme inhibition assay.

Swan probe: A nanoliter-scale and high-throughput sampling interface for coupling electrospray ionization mass spectrometry with microfluidic droplet array and multiwell plate

Nanoliter Centrifugal Liquid Dispenser Coupled with Superhydrophobic Microwell Array Chips for High-Throughput Cell Assays.

Automated High-Throughput Nanoliter-Scale Protein Crystallization Screening.

Continuous Cell Introduction and Rapid Dynamic Lysis for High-Throughput Single-Cell Analysis on Microfludic Chips with Hydrodynamic Focusing

A power-free, parallel loading microfluidic reactor array for biochemical screening

Nanoliter Quantitative High-Throughput Screening with Large-Scale Tunable Gradients Based on a Microfluidic Droplet Robot under Unilateral Dispersion Mode

A droplet-based, optofluidic device for high-throughput, quantitative bioanalysis.

A chip-to-chip nanoliter microfluidic dispenser.

Versatile Microfluidic Droplets Array for Bioanalysis