Abstract:After cold-rolling reduction with the shrinkage of more than 97 % and recrystallization annealing, the edged cubic texture develops in some fcc lattice metals with the high and medium values of stacking fault energy such as Ni, Cu, Al, Pt, and some alloys on their base. The extended bands of metals and fcc lattice alloys can be used to apply multilayer functional compositions. The authors studied the structure and crystallographic texture in bands of three-component copper-nickel-based alloys. The study showed the crucial possibility of creating multi-component alloys based on the Cu+40% Ni binary alloy doped with such elements as Mo or Nb. The paper considers the formation of an edged cubic texture in bands of Cu–Ni–Mn, Cu–Ni–Nb, and Cu–Ni–Мо alloys produced through cold deformation with rolling and recrystallization annealing performed at different temperatures. The study identified that annealing during one hour at 1050 °С was an optimal recrystallization annealing mode when on the surface of bands made of (Cu+40 % Ni)–Me alloys (where Me=Mn, Mo, Nb) deformed at ~99 %, the most perfect cubic texture was realized. According to the data obtained, after such annealing mode, from 94% to 98% of grains with orientation {001} developed in the Cu–40% Ni–1.3% Mn, Cu–40% Ni–0.8% Mo, and Cu–40% Ni–0.5% Nb alloys. It opens the prospect of using these alloys as epitaxial substrates in the technology of high-temperature second-generation superconductors. The evaluation of mechanical characteristics showed that alloying contributed to an increase in the yield strength of Cu–40% Ni–1.3% Mn, Cu–40% Ni–0.8% Mo, and Cu–40% Ni–0.5% Nb alloys by 3–4 times compared with the yield strength value of a textured copper band.

Strong Cube Texture of Super-High Tungsten Ni–W Alloy Substrates Used in REBCO Coated Conductors

Strong Cube Texture Formation of Ni5W/Ni9.3W/Ni5W Composite Thin Substrates for YBCO-coated Conductors

Strong Cube Texture Formation in Heavily Cold-Rolled Ni8W/Ni12W/Ni8W Composite Alloy Substrates Used in YBCO Coated Conductors

In Situ EBSD Study of Stable Cube Texture in an Advanced Composite Substrate Used in YBCO-Coated Conductors

<i>In Situ</i> EBSD Study of Stable Cube Texture in an Advanced Composite Substrate Used in YBCO-Coated Conductors

Effect of Annealing Temperature on Cube Texture Formation in Ni7W/Ni12W/Ni7W Compound Substrate

Ni-Cr textured substrates with reduced ferromagnetism for coated conductor applications

Ion-Beam Bombardment Induced Texture in Nickel Substrates for Coated High-T-C Superconductors

Evolution of Microstructure, Texture and Topography During Cold Rolling and Recrystallization of Ni–5at.%W Alloy Substrate for Coated Conductors

FORMING AN EDGED CUBIC TEXTURE IN BAND SUBSTRATES MADE OF (Cu+Ni)–Me (Me=Mo, Mn, Nb) ALLOYS FOR HIGH-TEMPERATURE SECOND-GENERATION SUPERCONDUCTORS

Fabrication of Textured Ni–9.3at.%W Substrate by Electropulsing Intermediate Annealing Method

Preparation and Evaluation of Cube Texture Ni Substrate for Ybco-Coated Superconductor

Preparation and Properties of Textured Ni–W Coatings Electrodeposited on the Steel Surface from a Pyrophosphate Bath

Fabrication of Thick REBCO–Coated Conductors with High Performance on Metal Tapes by Pulsed Laser Deposition Process

A Novel All-Conductive Architecture on Biaxially Textured Metal Substrates for YBCO Coated Conductors

Development and Evolution of Biaxial Texture of Rolled Nickel Tapes by Ion Beam Bombardment for High Tc Coated Conductors

Fabrication Technology of REBCO Coated Conductor and Its Development

The Manufacturing of an Electroplated Ni Layer on Textured Cu Substrate for Cu-Based Hts Coated Conductors

Effect of different deformation and annealing procedures on non-magnetic textured Cu60Ni40 alloy substrates

Analysis of the Ni-5%at.W Alloy Substrate Texture Evolution at Different Strain Levels Using the EBSD Technique

Improvement of Surface Morphology and Superconducting Properties of YBCO Coated Conductor on Ni-W Tapes