Abstract:After cold-rolling reduction with the shrinkage of more than 97 % and recrystallization annealing, the edged cubic texture develops in some fcc lattice metals with the high and medium values of stacking fault energy such as Ni, Cu, Al, Pt, and some alloys on their base. The extended bands of metals and fcc lattice alloys can be used to apply multilayer functional compositions. The authors studied the structure and crystallographic texture in bands of three-component copper-nickel-based alloys. The study showed the crucial possibility of creating multi-component alloys based on the Cu+40% Ni binary alloy doped with such elements as Mo or Nb. The paper considers the formation of an edged cubic texture in bands of Cu–Ni–Mn, Cu–Ni–Nb, and Cu–Ni–Мо alloys produced through cold deformation with rolling and recrystallization annealing performed at different temperatures. The study identified that annealing during one hour at 1050 °С was an optimal recrystallization annealing mode when on the surface of bands made of (Cu+40 % Ni)–Me alloys (where Me=Mn, Mo, Nb) deformed at ~99 %, the most perfect cubic texture was realized. According to the data obtained, after such annealing mode, from 94% to 98% of grains with orientation {001} developed in the Cu–40% Ni–1.3% Mn, Cu–40% Ni–0.8% Mo, and Cu–40% Ni–0.5% Nb alloys. It opens the prospect of using these alloys as epitaxial substrates in the technology of high-temperature second-generation superconductors. The evaluation of mechanical characteristics showed that alloying contributed to an increase in the yield strength of Cu–40% Ni–1.3% Mn, Cu–40% Ni–0.8% Mo, and Cu–40% Ni–0.5% Nb alloys by 3–4 times compared with the yield strength value of a textured copper band.

Strong Cube Texture Formation of Ni5W/Ni9.3W/Ni5W Composite Thin Substrates for YBCO-coated Conductors

Strong Cube Texture Formation in Heavily Cold-Rolled Ni8W/Ni12W/Ni8W Composite Alloy Substrates Used in YBCO Coated Conductors

In Situ EBSD Study of Stable Cube Texture in an Advanced Composite Substrate Used in YBCO-Coated Conductors

<i>In Situ</i> EBSD Study of Stable Cube Texture in an Advanced Composite Substrate Used in YBCO-Coated Conductors

Strong Cube Texture of Super-High Tungsten Ni–W Alloy Substrates Used in REBCO Coated Conductors

Preparation and Evaluation of Cube Texture Ni Substrate for Ybco-Coated Superconductor

Effect of Annealing Temperature on Cube Texture Formation in Ni7W/Ni12W/Ni7W Compound Substrate

Evolution of Microstructure, Texture and Topography During Cold Rolling and Recrystallization of Ni–5at.%W Alloy Substrate for Coated Conductors

Improvement of Surface Morphology and Superconducting Properties of YBCO Coated Conductor on Ni-W Tapes

Metal Organic Deposition of Lanthanum Zirconate Buffer Layer on Biaxially Textured Ni-5%W Substrate

Preparation and Sintering Performance of W-Ni/Yb2O3 Composite Materials

FORMING AN EDGED CUBIC TEXTURE IN BAND SUBSTRATES MADE OF (Cu+Ni)–Me (Me=Mo, Mn, Nb) ALLOYS FOR HIGH-TEMPERATURE SECOND-GENERATION SUPERCONDUCTORS

Fabrication of YBCO Coated Conductors on Biaxial Textured Metal Substrate by All-Sputtering

A Novel All-Conductive Architecture on Biaxially Textured Metal Substrates for YBCO Coated Conductors

Ion-Beam Bombardment Induced Texture in Nickel Substrates for Coated High-T-C Superconductors

Preparation and Properties of Textured Ni–W Coatings Electrodeposited on the Steel Surface from a Pyrophosphate Bath

MOCVD Preparation of YBCO Coated Conductors on CeO2/YSZ/Y2O3 Buffered RABiTS Substrate

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Crystalline Alignment and In-plane Texture Improvement of Buffer Layers Deposited on NiW Tapes

Influence of Buffer Layer Surface Morphology on YBCO Critical Current Density Deposited on NiW Tapes

Improved Textured La2Zr2O7 Buffer Layers on Bi-Axially Textured Ni–W Substrates Using CeO2 Seed Layers for YBa2Cu3O7−x Coated Conductors