Abstract:The silicon carbide (SiC) power module is one of the most popular semiconductor devices in industrial applications with the enhanced current rating. In this paper, a 1200-V/200-A SiC three-level (3L) module with neutral point clamped (NPC) topology is designed and validated. Compared with other existing works, the drain current of the designed module is accurately measured by a custom-made current transformer (CT) combined with a commercially off-the-shelf current probe (CP), which is critical for power loss evaluation. Based on the simulation and experiment results, it can be found that the maximum internal commutation loop stray inductance is no more than 40 nH, and the total switching loss can be reduced more than 30$\%$ compared with the hybrid 3L NPC module (Si IGBTs+SiC SBDs). Meanwhile, the power loss evaluation demonstrates that the designed 3L NPC module with all-SiC device is more suitable for high-voltage and high-frequency applications compared with its 2L counterpart, and the thermal simulation shows that the maximum junction temperature is less than 120 ${}^{\circ }$C when the module operates as a buck converter with $V_{DC}$ = 600 V, $I_{o}$ = 150 A, and $f_{s}$ = 100 kHz. In addition, compared with the 2L module, the 3L one presents enhanced spectrum amplitude in the high frequency (HF) range ($\ge$ 10 MHz) for the high-voltage applications, which indicates higher electromagnetic interference (EMI) noise. Then, two types of sunbber circuits are used to suppress the HF oscillation of the SiC 3L NPC module and alleviate the EMI noise as well according to the experiment results.

PowerBox: A Modern Power Electronics Education Toolbox Using Si and SiC Devices

Design of multi-functional portable electronic experimental box based on Labview and ARM

A High Density 400 W DC/DC Power Module with Integrated Planar Transformer and Half Bridge GaN IC

Soft-switching SiC Power Electronic Conversion for Distributed Energy Resources and Storage Applications

Design of Ac/dc Converter for Bidirectional On-Board Battery Charger with Minimizing the Amount of SiC MOSFET

Simulation on SiC Based Three Phase Boost Power Factor Correction Rectifier Using MATLAB PLECS Model and Its Numerical Analysis Verification

Development of High Reliability Power SiC Module Platform Packag-ing for Low Carbon Vehicles

High efficiency power factor correction power supply based on SiC device

SiC based Technology for High Power Electronics and Packaging Applications

A Three-Phase-Module-Parallel Si & SiC Hybrid Inverter with Smaller Filter Size and Low Cost

Module and System Considerations to Maximize Performance Advantages of SiC Power Devices

An educational tool for designing DC motor control systems through FPGA-based experimentation

Comparative Study on Power Module Architectures for Modularity and Scalability

Development of modular and accessible teaching labs, incorporating modelling and practical experimentation

Auxiliary subsystems of a General-Purpose IGBT Stack for high-performance laboratory power converters

Design, Packaging and Evaluation of an All-SiC-Based Four-Level ANPC Power Module

A Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues

1700 V full-SiC half-bridge power module with low switching loss

Design and Evaluation of a 1200-V/200-A SiC Three-Level NPC Power Module

Design of an automated test bed for experimental Si and SiC SGTO devices

Experience on Teaching Multiple Cs Courses with Portable Embedded System Labware in A Box