Abstract:To take full advantages of Wide Bandgap power semiconductor devices, breakthroughs on power module development are heavily explored nowadays. This paper introduces a 1.2kV SiC half bridge intelligent power module utilizing 80μm flexible epoxy-resin as substrates instead of traditional Direct-bonded Copper, for better thermal-stress management and lower cost. The investigation on the flexible epoxy-resin material indicates that it has low leakage current even at 250 °C, and high thermal conductivity up to 8 W/mK. No bonding wires are applied in the half bridge power module, instead, double-side solderable SiC MOSFET and diodes are fabricated and utilized for low parasitics and double-side cooling function. To further decrease the entire parasitic inductance on the power loop, a “Stack Structure” is proposed in this work to vertically connect highside and lowside switches with lower interconnection path than traditional power module technology. Simulation indicates that the parasitic inductance on the power loop is less than 1.5 nH. More functionality is achieved by integrating the main power stage with gate driver circuits. Digital isolations are also included in the half bridge module, together with a Low Dropout regulator to eliminate the numbers of auxiliary power supply required by the power module. The size of the entire module is about 35mm × 15mm ×7mm. Electrical simulations and measurements, including leakage current, parasitic extractions, device characteristics, verified that the designed module can work properly with no degradation on the SiC devices, with 12ns turn-off and 48ns turn-on at 800V bus voltage, and 0.63 mJ, 0.23 mJ as turn-on and turn-off loss, respectively.

1700 V full-SiC half-bridge power module with low switching loss

Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules

Flexible Epoxy Resin Substrate Based 1.2 Kv SiC Half Bridge Module with Ultra-low Parasitics and High Functionality

Fabrication and Dynamic Switching Characteristics of 6.5kv400a SiC MOSFET Module

Characterization of a Bare-die SiC-based, Wirebond-less, Integrated Half-bridge with Multi-functional Bus-Bars

A Novel SiC MOSFET Module for High-power Soft-switching Converter

A 1200 V/200 A Half-Bridge Power Module Based on Si IGBT/SiC MOSFET Hybrid Switch

Dynamic Performance of 6.5kV/400A SiC MOSFET Module and its Gate Driver

Novel Polymer Substrate-Based 1.2 Kv/40 A Double-Sided Intelligent Power Module

Investigation of Low-Profile, High-Performance 62-mm SiC Power Module Package

A SiC Double-Sided Stacked Wire-Bondless Power Module for High-Frequency Power Electronic Applications

A Double-sided Cooled Power Module with Embedded Decoupling Capacitors

High Temperature Direct Double Side Cooled Inverter Module for Hybrid Electric Vehicle Application

Design and Evaluation of a 1200-V/200-A SiC Three-Level NPC Power Module

A Highly Integrated Multichip SiC MOSFET Power Module With Optimized Electrical and Thermal Performances

An Indirect Series-Connected SiC MOSFET Power Module with Voltage Self-Balance

A Quasi-Two-Level Medium-Voltage SiC MOSFET Power Module with Low Loss and Voltage Self-Balance

A Double-Side Cooled SiC MOSFET Power Module With Sintered-Silver Interposers: I-Design, Simulation, Fabrication, and Performance Characterization

10-kV SiC MOSFET Power Module With Reduced Common-Mode Noise and Electric Field

High power SiC inverter module packaging solutions for junction temperature over 220°C