Abstract:The impact of the boundary plane and impurity contamination on the recombination activity of Sigma3 boundaries in multicrystalline silicon (mc-Si) was studied by means of electron-beam-induced current (EBIC) technique. In the as-grown contamination-free mc-Si, the EBIC contrast of different Sigma3 boundaries was in the order of Sigma3{111}<Sigma3{110}<Sigma3{112}. This order may be attributed to the difference in the defect density of the Sigma3 boundaries due to the effect of the boundary plane. But the maximum EBIC contrast did not exceed 2% at 300 K, suggesting that the Sigma3 boundaries are originally electrically inactive and the boundary plane has no significant effect on their recombination activity. When contaminated with Fe at 900 degreesC, the EBIC contrasts of the Sigma3{110} and Sigma3{112} increased at 300 K, whereas that of the Sigma3{111} was still weak (<3%). This variation in the EBIC contrast may be related to the effect of boron and it is also indicated that the Sigma3{111} has the weakest gettering ability. When contaminated with Fe at 1100 degreesC, the EBIC contrasts of all the Sigma3 boundaries continued to increase and bright-denuded zones developed around the boundaries. The Sigma3 boundaries in the 1100 degreesC air-cooled mc-Si showed stronger EBIC contrasts and broader denuded zones than those in the 1100 degreesC quenched one. This phenomenon was explained in terms of the precipitation of Fe. The precipitation of Fe at grain boundaries (GBs) was affected by both the GB type and cooling rate, that is, Fe is easier to form precipitates onto the Sigma3{110} and Sigma3{112} boundaries during slow cooling. (C) 2005 American Institute of Physics.

EXPERIMENTAL DETERMINATION OF ACTIVITY INTERACTION COEFFICIENTS OF COMPONENTS IN Si-B-Fe AND Si-B-Al TERNARY SYSTEMS AT 1723 K

Calculating Models of Mass Action Concentration for Thermodynamic Properties of Phosphorus, Iron and Aluminum in Silicon Dilute Solutions

The Effect of Solution Treatment on the Si Particles’ Morphology Evolution and the Thermal Conductivity and Tensile Properties of Sb-Modified Al-8Si-0.6Mg Alloys

Mechanism of boron removal of primary Si phases and morphology evolution of impurity phases during slow cooling solidification refining of Al-30wt.%Si alloy with Zr additions

Effects of Si solution in θ-Al13Fe4 on phase transformation between Fe-containing intermetallic compounds in Al alloys

Mechanism of ZrB2 Formation in Al–Si Alloy and Application in Si Purification

Experimental Characterization and First-Principles Calculations of Zn Segregation at the Β″-Mg5al2si4/al Interfaces in Al-Mg-Si Alloys

Recombination Activity Of Sigma 3 Boundaries In Boron-Doped Multicrystalline Silicon: Influence Of Iron Contamination

Effects of boron content on the structure and magnetic properties of Fe81-xSi13BxMo2Cr1Cu1P2 nanocrystalline alloys

Formation and magnetic properties of Fe-B-Si amorphous alloys

Impurity phases and their removal in Si purification with Al–Si alloy using transition metals as additives

Interaction mechanism between hydrogen and boron during the Al–Si solvent refining with hydrogen assistance

Enhanced boron removal by CrMnFeNi-based high-entropy alloys during purification of silicon

Thermodynamic Effects of Alloying Elements on Solid-State Interfacial Reactions in a Multicomponent System: Theoretical Treatment and Application in SiC f /Ti Composites

Effects of Si/B ratio on the isothermal crystallization behavior of FeNiSiBCuNb amorphous alloys

Effects of silicon content on electrical resistivity and thermal conductivity of Al-Si binary alloys.

Coupled Experimental Study and Thermodynamic Modeling of the Fe–Si–N System

Effect of Si content on interfacial reaction and properties between solid steel and liquid aluminum

Thermodynamic Analysis of the Interactions Between Nb–Si Alloy and Molding Material

Si Solution in Θ-Al13fe4 from First-Principles

A Quantitative Study on the Interaction Between Silicon Content and Heat Treatment on Thermal Conductivity of Al-Si Binary Alloys