Abstract:The effects of trace transition elements (Mn, Cr, V) on the solidification microstructure and the thermal conductivity of Al-9Si based alloys have been investigated. It was found that the effect of Mn, Cr, V on the solidification behavior and solidification microstructure is mainly related to α-Al grains via affecting heterogeneous nucleation and growth restriction, while no significant effect on the solidification behavior and microstructure of eutectic Si was observed. Compared with factors including grain size of α-Al and morphology characteristics (e.g. size, spacing, and shape factor) of eutectic Si, the solid solubility in Al matrix is confirmed to be one of the most important factors affecting thermal conductivity. Due to the larger partition coefficient of V compared with Cr and Mn, the solid solubility and the lattice distortion of α-Al in Al-9Si-xV alloy were increased significantly, thus the thermal conductivity of alloy was decreased steeply from 171.7 to 152.3 W/m·K with the content of V increasing from 15 to 1010 ppm. A linearly fitted curve reflecting the relationship between the content of the transition elements and the thermal conductivity of alloys has been proposed, which can be used to optimize the alloy composition in subsequent remelting or recycling process. Furthermore, two thermal conductivity models (H-S model and Maxwell model) also have been used to evaluate the effect of Mn, Cr, V on thermal conductivity, in which the thermal conductivity of α-Al was corrected based on the measured solid solubility. In this way, the data correlation between the experimental and fitted value based on H-S model and Maxwell model is increased from 0.18 to 0.96. These obtained results could be helpful to precisely control the composition and further improve the thermal conductivity of Al-Si based alloy during the primary production and / or recycling process.

Effects of silicon content on electrical resistivity and thermal conductivity of Al-Si binary alloys.

A Quantitative Study on the Interaction Between Silicon Content and Heat Treatment on Thermal Conductivity of Al-Si Binary Alloys

The Effect of Solution Treatment on the Si Particles’ Morphology Evolution and the Thermal Conductivity and Tensile Properties of Sb-Modified Al-8Si-0.6Mg Alloys

Effects of Si and Sr elements on solidification microstructure and thermal conductivity of Al–Si-based alloys

Effects of Si Content and Ca Addition on Thermal Conductivity of As-Cast Mg⁻Si Alloys

Effect of Modification with Different Contents of Sb and Sr on the Thermal Conductivity of Hypoeutectic Al-Si Alloy

Effect of Silicon Micro-Alloying on the Thermal Conductivity, Mechanical Properties and Rheological Properties of the Al–5Ni Cast Alloy

Elucidating thermal conductivity mechanism of Al-9Si based alloys with trace transition elements (Mn, Cr, V)

Effect of Si content on interfacial reaction and properties between solid steel and liquid aluminum

Effect of Si Content on the Uniaxial Tensile Behavior of Mo-Si Solid Solution Alloys

Densities, Surface Tensions, and Viscosities of Molten High‐Silicon Electrical Steels with Different Silicon Contents

Effect of Si on Phase Equilibria, Mechanical Properties and Tribological Behaviour of Al-Cu Alloy

Influence of Si contents on the microstructure and corrosion resistance of the Zn−Al−Mg−Si alloys

Effect of low-temperature annealing on electric resistivity and mechanical anisotropy of Al-Si binary alloy fabricated by laser-powder bed fusion

Thermoelectric effect of silicon films prepared by aluminum-induced crystallization

Effect of Cooling Rates and rapidly quenched on Al-Si alloy

The Effect of Si Content on the Microstructure and Mechanical Properties of Al–1.2Mg–xSi–1.2Cu–0.6Mn Cast Alloy

Effect of Sr modification on microstructure and thermal conductivity of hypoeutectic Al−Si alloys

Effect of cooling rates and heat treatment time on Si phase of AlSi10Mg alloy manufactured by selective laser melting: Microstructure evolution and strengthening mechanism

Influence of Si, Cu, B, and Trace Alloying Elements on the Conductivity of the Al-Si-Cu Alloy

Microstructure and Performance of Al-Si Alloy with High Si Content by High Temperature Diffusion Treatment