Abstract:(Al,Si)3(Zr,Ti)-D022/D023 are phases that may form in aerospace and automotive aluminium alloys. The substitution of Zr/Ti in these solid solutions is widely reported in the literature; however, it remains relatively unexplored for Si. In this work, in situ precipitation of (Al,Si)3(Zr,Ti)-D022/D023 intermetallics was performed using Al-Si-Zr-Ti alloys. The precipitation, sedimentation and concentration of numerous intermetallic particles were accomplished by filtrating the residual molten aluminium using a temperature/pressure-controlled vessel adapted with a PoDFA filter. A combination of SEM, TEM, XRD and EMP analysis allowed the identification of (Al,Si)3(Zr,Ti)-D022/D023 intermetallics concentrated within α -FCC matrices of non-Si-doped (sample S2) and Si-doped (samples S4 and S6) alloys. EDS analysis confirmed that Zr and Ti substitute each other in the D022 and D023 phases, whereas Si substitutes in Al sites. Acceptance of Si inside the D023 phase was not expected according to FTlite (FactSage) and TCAL7 (Thermo-Calc) databases. Additionally, Si was found to enhance the formation of (Al,Si)3(Zr,Ti)-D022 intermetallics with high Zr-content, contrary to FactSage 7.3 predictions. TEM results showed intermetallic/FCC crystal coherency for samples S2 and S6, implying that these intermetallics acted as nucleation sites for the Al-phase due to their small lattice mismatch. Furthermore, Si site occupancy was calculated for both (Al,Si)3Ti-D022 and (Al,Si)3Zr-D023 phases via DFT, showing that sites 2b and 4e are the most favorable for Si occupation, respectively. Finally, a thermodynamic model is derived to describe Si substitution upon solidification. Experimental and numerical examinations indicate that Si substitution preferentially occurs in the D022 intermetallics compared to the D023 phase.

Mechanism of ZrB2 Formation in Al–Si Alloy and Application in Si Purification

Mechanism of boron removal of primary Si phases and morphology evolution of impurity phases during slow cooling solidification refining of Al-30wt.%Si alloy with Zr additions

Possibility of Complete Collecting Eutectic Si and Primary Si as Purified Si During Al-Si Solvent Refining with Zr Additions

Impurity phases and their removal in Si purification with Al–Si alloy using transition metals as additives

Experimental Characterization and First-Principles Calculations of Zn Segregation at the Β″-Mg5al2si4/al Interfaces in Al-Mg-Si Alloys

Exploring the Local Structure of Molten Al-Zr-Y(Si) Alloys Using Ab Initio Molecular Dynamics

Enhanced boron removal by CrMnFeNi-based high-entropy alloys during purification of silicon

Purification of metallurgical-grade silicon using Si–Sn alloy in presence of Hf, Zr, or Ti

Effect of impurity phase migration on Al-30wt.%Si solvent refining with Zr additions during directional solidification

The Multi-Scale Microstructure and Strengthening Mechanisms of Mo-12Si-8.5BxZr (at.%) Alloys

Efficient separation of bulk Si and enhanced B removal by Si–Sn–Cu ternary solvent refining with Zr addition

Enhancing P removal from primary Si by P-containing Al2Si2Sr phase during Al–Si solvent refining

Improving the Mechanical Properties of Nb-24Ti-16Si-2Al Alloy by Adding Zr and Fe to Regulate Silicide

Formation Mechanism and Effect on the Mechanical Properties of TiSi Phase for Ti-5Al-5Mo-5Cr-3Nb-2Zr Alloyed by Silicon

In Situ Synthesis, Mechanical Properties, and Oxidation Resistance of (sic+zrb2)/zr3[al(si)]4c6 Composites

Synthesis and characterization of (Al,Si)3(Zr,Ti)-D022/D023 intermetallics: Understanding the stability of silicon substitution

Influences of different Zr/Sc ratios on microstructure and mechanical properties of Al-2Si alloy

Microstructure and mechanical properties of Nb 16Si alloys with Zr additions

EXPERIMENTAL DETERMINATION OF ACTIVITY INTERACTION COEFFICIENTS OF COMPONENTS IN Si-B-Fe AND Si-B-Al TERNARY SYSTEMS AT 1723 K

Effect of strontium and melt purification on the solidification microstructure of hypereutectic Al-Si alloys

In Situ Fabrication and Microstructure of Micro-Nano ZrB2p/Al Composites