Abstract:Ionized physical vapor deposition techniques, such as high-power impulse magnetron sputtering (HiPIMS) are gaining popularity due to their ability to produce high-quality thin films at low deposition temperatures. In those techniques, ions are commonly accelerated onto the growing film using negative potential applied to the substrate. One key challenge however is, how such potentials can be applied on insulating or electrically floating substrates. In this work, we present a novel approach for low-temperature deposition of high-quality thin films on insulating substrates using Synchronized Floating Potential High-Power Impulse Magnetron Sputtering (SFP-HiPIMS). This technique leverages the negative floating potential, induced on the substrate during the HiPIMS discharge. By synchronizing the ion arrival with the substrate's floating potential, specific ions can be accelerated preferentially, thereby enhancing adatom mobility and improving film quality while mitigating the detrimental effects of Ar+ ion bombardment. Our proof-of-concept study demonstrates the deposition of high-quality, textured Al0.8Sc0.2N thin films on various insulating substrates at low temperatures. We show that synchronizing the Al and Sc ion fluxes with the induced negative floating potential significantly enhances the films' crystallinity, c-axis texture and at the same time reduces residual stress. In addition, it enables epitaxial growth on sapphire at temperatures as low as 100°C. The results of this study demonstrate that SFP-HiPIMS provides a practical and economical solution for a long-standing challenge in physical vapor deposition, which can be implemented in standard deposition equipment. SFP-HiPIMS therefore paves the way for advanced manufacturing processes in various emerging technologies.

Low-temperature Deposition of Large-Grain Polycrystalline Si Thin Films on Polyethylene Terephthalate

Super large grain size of poly-Si obtained by using the solid-phase crystallization method

Deposition of Dense SiO2 Thin Films for Electrical Insulation Applications by Microwave ECR Plasma Source Enhanced RF Reactive Magnetron Sputtering

Floating Low-Temperature Radio-Frequency Plasma Oxidation of Polycrystalline Silicon-Germanium

Growth of Poly-Crystalline Si Films on Flexible Substrate by Hot Wire Chemical Vapor Deposition

Cold Deposition of Large-Area Amorphous Hydrogenated Silicon Films by Dielectric Barrier Discharge Chemical Vapor Deposition

Low-temperature preparation of phosphorus doped μc -Si:H thin films by low-frequency inductively coupled plasma assisted chemical vapor deposition

Influence of the partial pressure of ethene on the crystallinity of 3C-SiC films grown on Si(111) by chemical vapor deposition

On the Formation of Solid State Crystallized Intrinsic Polycrystalline Germanium Thin Films

Crystallization of amorphous silicon thin films: The effect of rapid thermal processing pretreatment

Influence of Substrate on Crystal Orientation of Large-Grained Si Thin Films Formed by Metal-Induced Crystallization

Highly Doped P-Type Microcrystalline Silicon Thin Films Fabricated by A Low-Frequency Inductively Coupled Plasma at A Low Temperature

Controlled Growth of High-Quality Poly-Silicon Thin Films with Huge Grains on Glass Substrates Using an Excimer Laser

High Rate Deposition of Stable Hydrogenated Amorphous Silicon in Transition from Amorphous to Microcrystalline Silicon

Low Temperature Deposition of Functional Thin Films on Insulating Substrates: Selective Ion Acceleration using Synchronized Floating Potential HiPIMS

Low Temperature and High Deposition Rate Fabricating A-Si:H Thin Films and Solar Cells

Influence of Substrate on the Growth of Microcrystalline Silicon Thin Films Deposited by Plasma Enhanced Chemical Vapor Deposition

The Study of Microcrystalline Silicon Thin Films Prepared by PECVD

Effects of Substrate Temperature on the Properties of Silicon Oxide Films by PECVD

Thickness-dependent carrier transport of PdSe 2 films grown by plasma-assisted metal selenization

N-Type Polycrystalline Si Thick Films Deposited on SiNx-coated Metallurgical Grade Si Substrates