Abstract:This chapter presents the performance of a two-stage pulse tube cryocooler with 3He as the 2nd stage working fluid. This cooler consists of two pulse tube stages with separate gas supply. To save the amount of 3He, only the smaller second-stage is charged with 3He, while the first stage still operates with 4He as working fluid. A minimum no-load temperature of 1.27 K at the 2nd stage with the 1st stage at 23 K has been achieved by a present two-stage PTC, which is the lowest temperature obtained by regenerative cryocoolers up to now. At an input power of 1.49 kW to the 2nd stage, the cooler provides a maximum cooling power of 735 mW at 4.2 K with 3He. The cooler consists of two parallel separate pulse tube stages. The incoming gas to the second stage is precooled by a heat exchanger thermally connected to the cold end of the first stage. Compared to that of coolers with common gas supply, such design presents higher flexibility in distribution of cooling capacity of the stages and allows an easier adjustment of dc-flow. In addition, this arrangement makes possible to operate the two stages with different compressors and at different operating frequencies.

INVESTIGATION OF PULSE TUBE CRYOCOOLERS WITH GAS MIXTURE

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

Experimental investigation on pulse tube refrigerator with binary mixtures

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

Study On Pulse Tube Refrigeration Performance With Two-Component Gas Mixture

EXPERIMENTAL STUDY ON THERMO ACOUSTICALLY DRIVEN PULSE TUBE REFRIGERATOR WITH MIXTURES

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Performance of a pulse tube cryocooler with two separate stages using He-3 in the second stage

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Influence of He-H2 mixture proportion on the performance of pulse tube refrigerator

Experimental Study On Pulse Tube Refrigeration With Helium And Nitrogen Mixtures

Thermodynamic Performance Prediction Of Pulse Tube Refrigeration With Mixture Fluids

Investigation On The Regenerator Performance Using Gas Mixtures

Study on a single-stage G-M type pulse tube cooler with helium and hydrogen mixture

Investiuation on Two-Stage Pulse Tube Refrigeration with Helium and Hydrogen Mixture

Experimental study on a three-stage cascade pulse tube cryocooler with transmission tube

Investigation of a Near-63 K Isothermal in a Pulse Tube Refrigerator with He-N[sub 2] Mixtures

Discussion On Regenerator Performance Improvement With Binary Gas Mixture

Numerical Simulation of a GM-type Pulse Tube Cryocooler System: Part II. Rotary Valve and Cold Head

He-H2 Mixture and Er3NiHx Packing for the Refrigeration Enhancement of Pulse Tube Refrigerator

Study on a Cascade Pulse Tube Cooler with Work Recovery