Abstract:Benefiting from the developments in micromachining technologies, Joule–Thomson (JT) cryogenic coolers have been miniaturized for cooling cold electronics based either on semiconductor, superconductor, or a combination of the two. The performance of these electronics is affected not only by temperature but also by temperature stability; however, many problems related to the temperature stability of JT microcoolers have not been solved. In this study, we investigate experimentally the performance of a JT microcooler operating with pure nitrogen gas, nitrogen/methane mixture, and nitrogen/ethylene mixture. The cool-down curves and the cooling powers of the microcooler operating with the three types of working fluids between 0.1 MPa and 6.0 MPa are presented. Based on the cooling power measurements, the effect of heat load on the temperature stability of the microcooler is discussed. The microcooler operating with nitrogen/ethylene mixture demonstrates the best temperature stability due to its characteristics of vapor–liquid–liquid equilibrium. Besides the properties of the working fluids, the degree of change in mass-flow rate of the microcooler also affects the temperature stability. This study is conducted to promote the widespread use of cryogenic electronics that are sensitive to the temperature fluctuation.

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

Experimental Study On Pulse Tube Refrigeration With Helium And Nitrogen Mixtures

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

Study On Pulse Tube Refrigeration Performance With Two-Component Gas Mixture

Experimental investigation on pulse tube refrigerator with binary mixtures

Investigation of a Near-63 K Isothermal in a Pulse Tube Refrigerator with He-N[sub 2] Mixtures

Temperature Stability of a Joule–Thomson Microcooler Operating with Pure and Mixed Gases

Study On Two-Component Gas Mixture In Regenerative Refrigerators

Thermoacoustically driven pulse tube refrigeration below 90K

Thermodynamic Performance Prediction Of Pulse Tube Refrigeration With Mixture Fluids

Cryogenic-temperature Thermoacoustically Driven Pulse Tube Refrigerator

A thermoacoustically driven pulse tube refrigerator capable of working below 120 K

Investigation On The Regenerator Performance Using Gas Mixtures

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Study of the Minimum Refrigeration Temperature of Regenerative Cryocoolers

Investiuation on Two-Stage Pulse Tube Refrigeration with Helium and Hydrogen Mixture

Performance of a pulse tube cryocooler with two separate stages using He-3 in the second stage

Study on a Pulse Tube Cryocooler Using Gas Mixture As Its Working Fluid

Refrigeration performance enhancement of pulse tube refrigerators with He–H2 mixtures and Er3NiHx regenerative material

He-H2 Mixture and Er3NiHx Packing for the Refrigeration Enhancement of Pulse Tube Refrigerator

Investigation Of A 2-Stage Solvay Refrigerator With Magnetic Material Regenerator