Abstract:Benefiting from the developments in micromachining technologies, Joule–Thomson (JT) cryogenic coolers have been miniaturized for cooling cold electronics based either on semiconductor, superconductor, or a combination of the two. The performance of these electronics is affected not only by temperature but also by temperature stability; however, many problems related to the temperature stability of JT microcoolers have not been solved. In this study, we investigate experimentally the performance of a JT microcooler operating with pure nitrogen gas, nitrogen/methane mixture, and nitrogen/ethylene mixture. The cool-down curves and the cooling powers of the microcooler operating with the three types of working fluids between 0.1 MPa and 6.0 MPa are presented. Based on the cooling power measurements, the effect of heat load on the temperature stability of the microcooler is discussed. The microcooler operating with nitrogen/ethylene mixture demonstrates the best temperature stability due to its characteristics of vapor–liquid–liquid equilibrium. Besides the properties of the working fluids, the degree of change in mass-flow rate of the microcooler also affects the temperature stability. This study is conducted to promote the widespread use of cryogenic electronics that are sensitive to the temperature fluctuation.

Experimental investigation on pulse tube refrigerator with binary mixtures

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

Study On Pulse Tube Refrigeration Performance With Two-Component Gas Mixture

Experimental Study On Pulse Tube Refrigeration With Helium And Nitrogen Mixtures

EXPERIMENTAL STUDY ON THERMO ACOUSTICALLY DRIVEN PULSE TUBE REFRIGERATOR WITH MIXTURES

Temperature Stability of a Joule–Thomson Microcooler Operating with Pure and Mixed Gases

Thermodynamic Performance Prediction Of Pulse Tube Refrigeration With Mixture Fluids

Cryogenic-temperature Thermoacoustically Driven Pulse Tube Refrigerator

Thermoacoustically driven pulse tube refrigeration below 90K

A thermoacoustically driven pulse tube refrigerator capable of working below 120 K

Investigation of a Near-63 K Isothermal in a Pulse Tube Refrigerator with He-N[sub 2] Mixtures

Study On Two-Component Gas Mixture In Regenerative Refrigerators

He-H2 Mixture and Er3NiHx Packing for the Refrigeration Enhancement of Pulse Tube Refrigerator

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Packing for the Refrigeration Enhancement of Pulse Tube Refrigerator

Refrigeration performance enhancement of pulse tube refrigerators with He–H2 mixtures and Er3NiHx regenerative material

Discussion On Regenerator Performance Improvement With Binary Gas Mixture

Influence of He-H2 mixture proportion on the performance of pulse tube refrigerator

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Experimental Results of the Internal Process of A Double Inlet Pulse Tube Refrigerator