Abstract:Methanol to olefins (MTO) is a new technology of modern coal-to-chemicals industry. The catalyst performance and selectivity of light olefin in the MTO process can be remarkably improved by well-designed reactor operating mode. The simulation of MTO reaction in a single, two and three fluidized-bed connected in series was carried out by using the reaction and deactivation kinetics experimentally obtained on the commercial SAPO-34 catalyst, combined with fluidized-bed dynamic two-phase model and particle residence time model. The effects of catalyst residence time, gas-solid cocurrent and countercurrent flow on the MTO performance were investigated. The simulation results show that the catalyst coke content and selectivity of the light olefin depend on the catalyst residence time. The multi-bed in series operating mode will reduce the particle back-mixing, which results in a more uniform coke distribution and a longer catalyst lifetime. For the gas-solid countercurrent flow of two reactors in series, the second reactor is used to pre-coke the catalysts before entering into the first reactor and therefore the light olefin selectivity and the total coke content are increased. The catalyst production capacity of one pass is increased by 24.4% compared with that of single reactor mode. Three reactors connected in series mode can fully utilize the different functions of each reactor for pre-coking, MTO reaction and post-coking, bring about a 1% increase in the selectivity of the light olefin and a 31.1% increase in the catalyst production capacity when compared with the single reactor.

Method for partially regenerating catalyst of methanol to olefin and method of methanol to olefin

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Development and application of energy-saving process for methanol to olefins

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Kinetic and Regenerator Modeling of the Coke Combustion in the Moving Bed MTP Process

Regeneration of Ozone Decomposition Catalysts by Elimination of O22- from Oxygen Vacancies

Regeneration of Ozone Decomposition Catalysts by Elimination of O2 2 2- from Oxygen Vacancies

Recent Progress in Methanol‐to‐Olefins (MTO) Catalysts

A Multi-Stage Fluidized Bed Strategy for the Enhanced Conversion of Methanol into Aromatics

Collaborative removal of fine catalysts particles and insoluble organics from methanol-to-olefins reaction wastewater using horizontal swirl regeneration micro-channel separation (HSRMS)

Multiphase catalytic reactors for methanol to olefins

Catalytic o-methylation of phenols and its application in converting crude phenols in a low-temperature coal tar to mesitol and durenol

A design kinetic and hydrodynamic study of a coupled dual fluidized bed MTO reactor-regenerator system

Novel Electrolytic Regeneration Method for Cyclic Regeneration of Ozone Decomposition MnO x Catalysts

Sustainable catalysts for methanol carbonylation

Ethylbenzene dehydrogenation over Fe2O3 promoted TiO2-ZrO2 catalysts and corresponding conceptual fluidized bed process

Conversion of Methanol with C5–C6 Hydrocarbons into Aromatics in a Two-Stage Fluidized Bed Reactor

Relay Catalysis for Highly Selective Conversion of Methanol to Ethylene in Syngas