Abstract:In conventional ethylbenzene dehydrogenation process, abundant superheated steam is consumed to supply reaction heat and inhibit coke formation, thereby a high operation cost is resulted. In this work, Fe2O3 promoted TiO2-ZrO2 catalyst demonstrated outstanding dehydrogenation performance in the absence of steam. The catalyst composition and preparation method have both been studied and optimized. The high specific surface area, well dispersion of Fe2O3 species, and appropriate acid-base properties are all necessary for ethylbenzene dehydrogenation. Ascribed to the reduction of Fe2O3 species, an induction period to reach the highest styrene selectivity was observed. For the catalyst after pre-reduction, an outstanding initial dehydrogenation performance can be obtained and kept stable in eight reaction-regeneration cycles. Further, a conceptual fluidized-bed ethylbenzene dehydrogenation process composed of a reactor, a regenerator and a reduction section was proposed to realize continuous reaction-regeneration operation. This work not only provides a class of ethylbenzene dehydrogenation catalyst efficient in the absence of steam, but also presents the concept of fluidized bed process obviously reducing the operation cost and achieving self-heat balance.

What problem does this paper attempt to address?

The paper attempts to address the issue of increased operational costs and reduced catalyst stability due to the extensive use of superheated steam in the traditional dehydrogenation of ethylbenzene to produce styrene. Specifically, the study investigates the efficient dehydrogenation of ethylbenzene using Fe₂O₃-modified TiO₂-ZrO₂ catalysts without the use of superheated steam. Additionally, the paper proposes a concept of a fluidized bed process to achieve continuous reaction-regeneration operations, thereby reducing operational costs and achieving self-thermal balance. ### Main Research Content: 1. **Catalyst Performance Study**: - A series of Fe₂O₃-TiO₂-ZrO₂ catalysts with different Fe₂O₃ loadings were prepared, and the effects of different preparation methods (co-precipitation, impregnation, and mechanical mixing) on catalyst performance were studied. - Through catalyst characterization (XRD, BET specific surface area, pore structure, TEM, NH₃/CO₂-TPD, XPS, etc.) and dehydrogenation performance tests, the relationship between catalyst structure and performance was established. 2. **Induction Period Phenomenon Study**: - It was observed that all Fe₂O₃-modified TiO₂-ZrO₂ catalysts exhibited an induction period when selectively producing styrene. - XPS characterization revealed that the induction period was due to the reduction of Fe₂O₃ species to Fe₃O₄ at the initial stage of the reaction, thereby increasing the selectivity for styrene. 3. **Continuous Reaction-Regeneration Performance Test**: - Pre-reduction treatment of the catalyst before the reaction showed that the pre-reduced catalyst achieved optimal initial dehydrogenation performance and remained stable during continuous reaction-regeneration cycles. - The 5Fe-TiZr catalyst maintained stable catalytic performance after 8 reaction-regeneration cycles, indicating that its structure and performance were not affected by repeated reaction-regeneration operations. 4. **Conceptual Fluidized Bed Process**: - A conceptual fluidized bed ethylbenzene dehydrogenation process was proposed, including a reactor, regenerator, and pre-reduction section, to achieve continuous reaction-regeneration operations. - This process not only avoids the use of superheated steam but also provides reaction heat through high-temperature regenerated catalysts and the introduction of fuel, significantly reducing operational costs and achieving self-thermal balance. ### Conclusion: - The traditional ethylbenzene dehydrogenation process requires a large amount of superheated steam to provide reaction heat and inhibit coke formation, leading to increased operational costs. - The Fe₂O₃-modified TiO₂-ZrO₂ catalysts in this study exhibited good dehydrogenation performance without the use of superheated steam. - The 5Fe-TiZr catalyst showed the highest dehydrogenation activity due to its high specific surface area, good dispersion of iron oxides, and suitable acid-base properties. - The proposed fluidized bed process concept can significantly reduce operational costs, achieve self-thermal balance, and maintain long-term stability of the catalyst.

Ethylbenzene dehydrogenation over Fe2O3 promoted TiO2-ZrO2 catalysts and corresponding conceptual fluidized bed process

Tuning Interfacial Electronic Properties Of Palladium Oxide On Vacancy-Abundant Carbon Nitride For Low-Temperature Dehydrogenation

CuZnCoOx Multifunctional Catalyst for in Situ Hydrogenation of 5-Hydroxymethylfurfural with Ethanol As Hydrogen Carrier

Development and application of energy-saving process for methanol to olefins

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Dehydrogenation of Ethylbenzene in the Presence of CO2 over Catalysts Prepared from Hydrotalcite-Like Precursors

TiO2 Supported Iron Catalyst for Selective Oxidative Dehydrogenation of Ethylbenzene

Oxidehydrogenation of Ethylbenzene over Supported Tio2 Catalysts

Insights into promotional effects for ethylbenzene dehydrogenation to styrene with steam over Fe-K, Fe-K-Ce and Fe-K-Ce-Mo mixed oxide catalysts

Coking-Resistant Iron Catalyst in Ethane Dehydrogenation Achieved through Siliceous Zeolite Modulation

Study on Catalyst for Selective Oxidation of Hydrogen in Ethylbenzene Dehydrogenation-Oxidation Process

Oxidative Dehydrogenation of Ethylbenzene with Carbon Dioxide over Metal-Doped Titanium Oxides

Low-Temperature Hydrotreatment of C4/C5 Fractions Using a Dual-Metal-Loaded Composite Oxide Catalyst

Dehydrogenation of ethylbenzene with CO2 over porous Co/Al2O3–ZrO2 catalyst

Effective Suppression of CO Selectivity for CO 2 Hydrogenation to High-Quality Gasoline

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

Comparison Study for the Oxidative Dehydrogenation of Isopentenes to Isoprene in Fixed and Fluidized Beds

Efficient Ethylbenzene Production from CO2 and Benzene in a Single-Bed Reactor

Dehydrogenation of dodecahydro-N-ethylcarbazole over spinel supporting catalyst in a continuous flow fixed bed reactor

A CuZn-BTC derived stable Cu/ZnO@SiO2 catalyst for ethanol dehydrogenation

Ethylbenzene Dehydrogenation to Styrene in the Presence of Carbon Dioxide over Chromia-Based Catalysts