Abstract:Hydrocarbon fuels play a crucial role in addressing excessive body temperatures experienced by hypersonic vehicles during high Mach number operations, serving both as propellants and coolants. Flow calorimeters measure fluid thermodynamic parameters. Traditional ones rely heavily on thermocouples for temperature measurement, leading to a black-box effect on thermodynamic parameter analysis. To solve these problems, a distributed flow calorimetry based on scanning radiation thermometry is proposed innovatively. The analysis object is transformed from the whole tube to the microelement. The heat balance equation for the microelement and the mapping relationship between tube coordinates, tube temperature, and fluid thermodynamic parameters have been established. The feasibility of the mathematical model of fluid temperature and distributed flow calorimetry is verified by numerical simulation. Experimental data from the National Institute of Standards and Technology are compared for the distributed specific heat capacities of water and n-decane over wide temperature ranges. Between temperatures of 296.43 and 564.45 K, water's distributed specific heat capacity shows a relative error ranging from −7.42% to 8.04%, with a mean deviation of −0.72%. For temperatures spanning 298.97–601.77 K, n-decane's distributed specific heat capacity exhibits a relative error from −5.13% to 5.57%, with a mean deviation of −0.31%. The results demonstrate that distributed flow calorimetry holds promising prospects for measuring the changes in thermodynamic parameters of fluids during heat exchange.

A Set of Vapor-Flow Calorimeter and the Heat Capacities of Benzene and Benzene-Cyclohexane

Experimental-Determination of the Isobaric Specific-Heat Capacities of Multicomponent Vapors Up to Temperatures of 600-K

A New Flow Calorimeter For The Determination Of The Isobaric Heat-Capacity Of Vapors

The Vapor Heal Capacities Of Acetone-Chloroform, Benzene-Carbon Tetrachloride And Benzene-Ethanol Binary Mixtures

Measurements of the Isobaric Heat Capacity of Pressurized Liquid Trans-1,3,3,3-tetrafluoropropene [r1234ze(e)] by Scanning Calorimetry

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

Vapor Heat Capacities of Acetic Acid + 4-Methyl-2-pentanone, at Atmospheric Pressure

Isobaric Heat Capacity Measurements for Dimethyl Ether and 1,1-Difluoroethane in the Liquid Phase at Temperatures from 305 K to 365 K and Pressures Up to 5 Mpa

Determination of vapor heat capacities of acetone-chloroform, benzene-carbon tetrachloride and benzene-ethanol binary systems

Calorimetric Determination of the Vapor Heat Capacity of Petroleum Cuts

Measurements of Isobaric Heat Capacity of R143a and R227ea at Liquid Phase by Quasi-Steady Scanning

The Molar Heat Capacities of (benzene+tetrachloromethane), (benzene+trichloromethane), (benzene+acetone), and (Acetone+trichloromethane)

Vapor Heat Capacity of Binary and Ternary Systems

Experimental Study of Pvtx Properties in the Gas Phase for Binary Mixtures of Dme and Hfc-134a

A New 3he Vapor-Pressure Equation on the Its-90 Scale

Vapor Heat Capacities of Some Polar–polar Binary Systems

Isobaric Heat Capacities of R245fa and R236fa in Liquid Phase at Temperatures from (315 to 365) K and Pressures Up to 5.5 MPa

Excess Molar Enthalpies of Dimethyl Carbonate and (butanol Isomers and 1-Pentanol) at T = (298.15, 313.15, and 328.15) K and P = (0.1, 1.0, and 10.0) MPa

Molar excess enthalpies of ethyl acetate+alkanols at T=298.15K, p=10.0MPa

Study on thermal capacity of endothermic hydrocarbon fuel by high-temperature calorimeter

Distributed Flow Calorimetry With Wide Temperature and Pressure Range Based on Scanning Radiation Thermometry