Abstract:ConspectusA key physical property of volatile liquids is vapor pressure (VP). Volatile organic compounds (VOCs) are a classification of compounds directly associated with low boiling points, high rates of evaporation, and high flammability. The majority of chemists and chemical engineers were directly exposed to the odor of simple ethers, acetone, and toluene in the air while taking an organic chemistry laboratory course as an undergraduate student. These are just a few examples of the numerous VOCs produced by the chemical industry. When toluene is poured into a beaker from its reagent bottle, its vapors readily evaporate at ambient temperature from this open container. When the cap is securely placed back on the reagent bottle of toluene, a dynamic equilibrium develops and exists in this closed environment. This chemical concept is known as a vapor-liquid phase equilibrium. A crucial physical property of spark-ignition (SI) fuels is high volatility. In the United States, most of the vehicles traveling on the road today have SI engines. Gasoline is the fuel used to power these engines. It is a major product manufactured by the petroleum industry. This fuel is petroleum based since it is a refined product of crude oil consisting of a mixture of hydrocarbons, additives, and blending agents. Thus, gasoline is homogeneous solution of VOCs.The VP as a function of temperature of a pure VOC can readily be measured using an ebulliometer. The VP is also known in the literature as the "bubble point pressure". In this investigation, the VP as a function of temperature was acquired for the VOCs ethanol, isooctane (2,2,4-trimethylpentane), and n-heptane. The latter two VOCs are primary reference fuels components found in 87, 89, and 92 grade gasoline. Ethanol is an oxygenate additive of gasoline. The VP of a homogeneous binary mixture of isooctane and n-heptane was also acquired using the same ebulliometer and methodology. In our work, an enhanced ebulliometer was used to collect the VP data in our work. It is known as the vapor pressure acquisition system. The devices that comprise the system automatically acquire the VP data and log it into an excel spreadsheet. The data are readily transformed into information to compute the heat of vaporization (ΔHvap). The results described in this Account compare quite favorably to the literature values. This validates our system for performing fast and reliable VP measurements.

Vapor Heat Capacities of Some Polar–polar Binary Systems

Vapor Heat Capacity of Binary and Ternary Systems

Heat Capacities of Binary Mixtures of Acetic Acid with Acetic Anhydride and Methenamine at Different Temperatures

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

The Vapor Heat Capacities of Acetone-Chloroform, Benzene-Carbon Tetrachloride and Benzene-Ethanol Binary Mixtures

Determination of vapor heat capacities of acetone-chloroform, benzene-carbon tetrachloride and benzene-ethanol binary systems

Vapor–Liquid Equilibria for the Binary Systems Difluoromethane (R32) + Trans-1,1,1,4,4,4-hexafluoro-2-butene (r1336mzz(e)) and Fluoroethane (R161) + Trans-1,1,1,4,4,4-hexafluoro-2-butene (R1336mzz(e))

Excess Molar Enthalpies of Methyl Acetate and (1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol, and 1-Pentanol) at T = (298.15 and 308.15) K and P = (5.0 and 10.0) MPa

The Molar Heat Capacities of (benzene+tetrachloromethane), (benzene+trichloromethane), (benzene+acetone), and (Acetone+trichloromethane)

Isobaric Molar Heat Capacities Measurement of Binary Mixtures Containing Ethyl Laurate and Ethanol at High Pressures

Excess Molar Enthalpies of Dimethyl Carbonate and (butanol Isomers and 1-Pentanol) at T = (298.15, 313.15, and 328.15) K and P = (0.1, 1.0, and 10.0) MPa

Vapor–liquid Equilibria for the Binary Mixtures of 2,3-Butanediol with N-Butanol, N-Butyl Acetate, and Ethyl Acetate at 101.3 Kpa

Vapor Heat Capacities of Acetic Acid + 4-Methyl-2-pentanone, at Atmospheric Pressure

Experimental-Determination of the Isobaric Specific-Heat Capacities of Multicomponent Vapors Up to Temperatures of 600-K

Molar excess enthalpies of ethyl acetate+alkanols at T=298.15K, p=10.0MPa

Isobaric Vapor Liquid Equilibrium of Binary Systems: p Xylene plus (Acetic Acid, Methyl Acetate and n Propyl Acetate) and Methyl Acetate plus n Propyl Acetate in an Acetic Acid …

Excess Molar Enthalpies of Ethylformate and (1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol, and 1-Pentanol) at T = (298.15 and 308.15) K and P = (5 and 10) Mpa

Study and Applications of Binary and Ternary Azeotropes

Calculating the Enthalpy of Vaporization of Ethanol, n-Heptane, Isooctane, and a Binary Mixture of Isooctane + n-Heptane from Their Vapor Pressure Data

Vapor−Liquid Equilibria for the Quaternary System Ethanol + Acetone + Benzene + Hexane

Volumetric and Viscometric Properties of Ethyl Caprate + 1-Propanol, + 1-Butanol, and + 1-Pentanol from 283.15 K to 318.15 K