Abstract:Excess molar enthalpies, $H_{\text{m}}^{\text{E}}$, at 298.15 K and 0.1 MPa have been measured by means of a Tian-Calvet microcalorimeter for the systems benzylamine (phenylmethanamine) + heptane, or + methanol, or + 1-propanol, or + 1-pentanol, or + 1-heptanol, or + 1-decanol. In addition, excess molar volumes, $V_{\text{m}}^{\text{E}}$, at the same conditions have been also determined using a densimeter Anton Paar model DSA 5000 for the benzylamine + heptane mixture. The $H_{\text{m}}^{\text{E}}$ of this solution is large and positive since at 298.15 K the system temperature is close to its upper critical solution temperature. Thus, systems with n-alkanes show positive deviations from the Raoult's law. The measured $|V_{\text{m}}^{\text{E}}|$ values are low, indicating the existence of large structural effects. $H_{\text{m}}^{\text{E}}$ values of mixtures involving 1-alkanols are large and negative. That is, interactions between unlike molecules are dominant and the systems are characterized by negative deviations from Raoult's law. It is shown that the enthalpy of the hydrogen bonding between molecules of 1-alkanol and benzyalmine are more negative than those between 1-alkanol molecules. The $V_{\text{m}}^{\text{E}}$ values of the systems with 1-alkanols are also large and negative, and are determined mainly by interactional effects since they increase in line with $H_{\text{m}}^{\text{E}}$ and with the alcohol size. The different contributions to $H_{\text{m}}^{\text{E}}$ have been evaluated. The systems have been studied using the DISQUAC and ERAS models. ERAS describes correctly the $V_{\text{m}}^{\text{E}}$ function. DISQUAC largely improves ERAS results on $H_{\text{m}}^{\text{E}}$ or on excess molar heat capacities at constant pressure for the mixtures with 1-alkanols, which underlines that physical interactions are very relevant in such solutions.

Molar excess enthalpies of ethyl acetate+alkanols at T=298.15K, p=10.0MPa

Excess Molar Enthalpies of Methyl Acetate and (1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol, and 1-Pentanol) at T = (298.15 and 308.15) K and P = (5.0 and 10.0) MPa

Excess Molar Enthalpies of Methylformate+(1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol and 1-Pentanol) at T=298.15K, P=(5.0, 10.0)mpa, and Methylformate+1-Propanol at T=333.15K, P=10.0mpa

Excess Molar Enthalpies of Ethylformate and (1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol, and 1-Pentanol) at T = (298.15 and 308.15) K and P = (5 and 10) Mpa

Excess Molar Enthalpies of Dimethyl Carbonate and (butanol Isomers and 1-Pentanol) at T = (298.15, 313.15, and 328.15) K and P = (0.1, 1.0, and 10.0) MPa

Heat Capacities of Binary Mixtures of Acetic Acid with Acetic Anhydride and Methenamine at Different Temperatures

Excess Molar Enthalpies of N-Octanol N-Alkane and Isopentanol N-Dodecane Mixtures under High-Pressure

Liquid−Liquid Equilibria for the Acetic Acid + Water + Amyl Acetate and Acetic Acid + Water + 2-Methyl Ethyl Acetate Ternary Systems

Excess Molar Enthalpies of Dimethyl Carbonate and (methanol, Ethanol, 1-Propanol, and 2-Propanol) at T = (298.15, 313.15, and 328.15) K and P = (0.1, 1.0, and 10.0) MPa

Flow Toolkit for Measuring Reaction Enthalpy and Application to Highly Exothermic Synthesis of Alkylaluminoxanes

Isobaric Heat Capacity Measurements for Dimethyl Ether and 1,1-Difluoroethane in the Liquid Phase at Temperatures from 305 K to 365 K and Pressures Up to 5 Mpa

Adiabatic compression heating of selected organic solvents under high pressure processing

Vapor Heat Capacities of Acetic Acid + 4-Methyl-2-pentanone, at Atmospheric Pressure

Excess Molar Enthalpies for Binary Mixtures of Benzyl Alcohol and Heptanone Isomers at Different Temperatures

The Molar Heat Capacities of (benzene+tetrachloromethane), (benzene+trichloromethane), (benzene+acetone), and (Acetone+trichloromethane)

Excess Molar Volume of Binary Mixtures of Methylheptenone+Alkanols at 298.15 K

The Vapor Heal Capacities Of Acetone-Chloroform, Benzene-Carbon Tetrachloride And Benzene-Ethanol Binary Mixtures

Measurement of Critical Temperatures, Critical Pressures and Densities of Acetone–Water Solutions for Simulation

Thermodynamics of mixtures containing amines. XVII. Excess molar enthalpy and volume measurements for benzylamine + heptane or + 1-alkanol mixtures at 298.15 K. Application of the DISQUAC and ERAS models

The Measurement and Calculation of Heat of Mixing for Aqueous Alkanolamine Solutions

Determination of vapor heat capacities of acetone-chloroform, benzene-carbon tetrachloride and benzene-ethanol binary systems