Abstract:The alkylation reaction of isobutane and 1-butene catalyzed by H2SO4 is a typical liquid-liquid heterogeneous reaction. Mass transfer is the limiting step. Configuring specific micro-mixing structures is useful to intensify the mass transfer and reaction performance in microchannels. A microreactor configured with contraction-expansion structures and triangular obstacles was used to improve the mixing and reaction performance of the isobutane alkylation process. The results show that the volumetric mass transfer coefficient in the microreactor configured with a micro-mixer was over 27 times of that in the stirring reactor and the reaction conversion reached 95.7% at only 12 s. In microchannels, hydrocarbons were dispersed in H2SO4 as droplets. In the microchannel configured with contraction-expansion structures and triangular obstacles, droplets could be effectively split and more than half of droplets were less than 0.4 mm. The specific interfacial area in the microchannel configured with contraction-expansion structures and triangular obstacles was 36% higher than that of the smooth microchannel. Moreover, the microreactor configured with contraction-expansion structures and triangular obstacles brought a strong velocity fluctuation, a big velocity difference between the hydrocarbon phase and the H2SO4 phase, and strong vortices in droplets. All these factors accelerated the surface renewal and greatly improved the mixing and mass transfer performance. The mechanism of droplet splitting under the synergetic effect of contraction-expansion structures and triangular obstacles was also studied. The research results are useful to design new microreactors for the reaction limited by mass transfer.

Flow Toolkit for Measuring Reaction Enthalpy and Application to Highly Exothermic Synthesis of Alkylaluminoxanes

Continuous Synthesis of Isobutylaluminoxanes in a Compact and Integrated Approach

Research Progress on Synthesis of Alkylaluminoxanes

A Two-Stage Flow Strategy for the Synthesis of Isobutyl-Modified Methylaluminoxane

Molar excess enthalpies of ethyl acetate+alkanols at T=298.15K, p=10.0MPa

Reaction Calorimetry in Continuous Flow Mode: A New Approach for the Thermal Characterization of High Energetic and Fast Reactions

Selective Electrochemical Oxidation of <i>p</i>-Xylylene Glycol Coupled with the Hydrogen Evolution Reaction via a Continuous Flow Strategy

Measuring enthalpy of fast exothermal reaction with micro-reactor-based capillary calorimeter

Thermal Characterization of Highly Exothermic Flash Chemistry in a Continuous Flow Calorimeter

Characterization of reaction enthalpy and kinetics in a microscale flow platform

Thermal and Kinetic Research on a Highly Exothermic Condensation Reaction by Powerful Calorimeters

In Situ Ir and X-Ray High Spatial-Resolution Microspectroscopy Measurements of Multistep Organic Transformation in Flow Microreactor Catalyzed by Au Nanoclusters

On-the-fly H2 Degassing: Towards Selective Borohydride Reduction of Α, Β-Unsaturated Esters to Allylic Alcohols in Continuous Microflow

A novel highly sensitive test reaction for micromixing: Acid‐base neutralization and alkaline hydrolysis of ethyl oxalate

Measuring Enthalpy of Fast Exothermal Reaction with Infrared Thermography in a Microreactor

Flow Electrolyzer Mass Spectrometry with a Gas-Diffusion Electrode Design

A Multifunctional Microfluidic Platform for High-Throughput Experimentation of Electroorganic Chemistry

On-The-Fly H 2 Degassing: Towards Selective Borohydride Reduction of α , β -Unsaturated Esters to Allylic Alcohols in Continuous Microflow

A 3D-Printed Continuous Flow Platform for the Synthesis of Methylaluminoxane

Reaction Performance and Flow Behavior of Isobutane/1-Butene and H2SO4 in the Microreactor Configured with the Micro-mixer

Facile High Throughput Wet-Chemical Synthesis Approach Using a Microfluidic-Based Composition and Temperature Controlling Platform