Abstract:Flow chemistry has greatly expanded the reaction toolbox by demonstrating a wide range of individual chemical transformations. For commercial scale processes, it provides an appealing alternative to batch reactors by reducing production costs, increasing product yield and overall process robustness. We describe an approach for continuous processing of a specialty chemical manufactured using a batch process with a typical yield of 150 kg per hour and concomitant adiabatic temperature increase of up to 250 °C. This necessitates controlled feed addition causing longer processing time, lower productivity, and undesirable polymerization reactions. We present a continuous process that addresses the challenges of thermal management and reaction selectivity using flow chemistry thereby enabling up to 12-fold reduction in residence time with a comparable product profile. Fundamental reactor engineering and design principles and associated safety considerations used for designing the reactor and continuous process are described. Guided by this analysis, a continuous process using a 1⁄4 inch tubular reactor is investigated. The results indicate residence time reduction from 6 hours to 30 minutes for comparable feed conversion of 87% and similar product composition. Greater than 90% conversion could not be achieved in the current reactor configuration and associated reactor runaway analysis suggests feed decomposition due to pressure fluctuations or insufficient reactants in the reactor. The analysis highlights the need for designing a reactor with better pressure control using a back pressure regulator and choosing a smaller diameter tube. These insights underscore the importance of applying fundamental reactor engineering principles for designing safe and efficient processes at an industrial scale.

Continuous Flowing Micro-Reactor For Aqueous Reaction At Temperature Higher Than 100 Degrees C

Microfluidic thermal digestion of aqueous sample at temperature higher than 100

A Continuous-Flow Microwave Reactor for Conducting High-Temperature and High-Pressure Chemical Reactions

On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow injection analysis

Microfluidic Sterilization.

Application of a simple rule for the design of micro- or meso-scale cooled reactors in a heat transfer limited regime

Measurement of Reaction Temperature Distribution Inside of Methanol Steam Reforming Microreactor Using Infrared Thermography

Efficiency, Monitoring and Control of Microwave Heating Within a Continuous Flow Capillary Reactor

Precise temperature control of microfluidic chamber for gas and liquid phase reactions

Design of Thermal Liquid Flow Microsensor

Improving Selectivity of Temperature-Sensitive Exothermal Reactions with Microreactor

Temperature Control System for Biochemical Reactions in Microchip-Based Devices

A Rapid And Controllable Acoustothermal Microheater Using Thin Film Surface Acoustic Waves

Highly modular PDMS microwave-microfluidic chip reactor for MAOS applications

Whole ceramic-like microreactors from inorganic polymers for high temperature or/and high pressure chemical syntheses.

Measuring enthalpy of fast exothermal reaction with micro-reactor-based capillary calorimeter

An integrated photocatalytic microfluidic platform enabling total phosphorus digestion

Facile High Throughput Wet-Chemical Synthesis Approach Using a Microfluidic-Based Composition and Temperature Controlling Platform

Development of a fast thermal response microfluidic system using liquid metal

Translating High-Temperature Microwave Chemistry to Scalable Continuous Flow Processes