Abstract:Flow chemistry has greatly expanded the reaction toolbox by demonstrating a wide range of individual chemical transformations. For commercial scale processes, it provides an appealing alternative to batch reactors by reducing production costs, increasing product yield and overall process robustness. We describe an approach for continuous processing of a specialty chemical manufactured using a batch process with a typical yield of 150 kg per hour and concomitant adiabatic temperature increase of up to 250 °C. This necessitates controlled feed addition causing longer processing time, lower productivity, and undesirable polymerization reactions. We present a continuous process that addresses the challenges of thermal management and reaction selectivity using flow chemistry thereby enabling up to 12-fold reduction in residence time with a comparable product profile. Fundamental reactor engineering and design principles and associated safety considerations used for designing the reactor and continuous process are described. Guided by this analysis, a continuous process using a 1⁄4 inch tubular reactor is investigated. The results indicate residence time reduction from 6 hours to 30 minutes for comparable feed conversion of 87% and similar product composition. Greater than 90% conversion could not be achieved in the current reactor configuration and associated reactor runaway analysis suggests feed decomposition due to pressure fluctuations or insufficient reactants in the reactor. The analysis highlights the need for designing a reactor with better pressure control using a back pressure regulator and choosing a smaller diameter tube. These insights underscore the importance of applying fundamental reactor engineering principles for designing safe and efficient processes at an industrial scale.

Translating High-Temperature Microwave Chemistry to Scalable Continuous Flow Processes

Converting a Mab Downstream Process from Batch to Continuous Using Process Modeling and Process Analytical Technology.

A Continuous-Flow Microwave Reactor for Conducting High-Temperature and High-Pressure Chemical Reactions

Scaling Up of Continuous-Flow, Microwave-Assisted, Organic Reactions by Varying the Size of Pd-functionalized Catalytic Monoliths

Application of a simple rule for the design of micro- or meso-scale cooled reactors in a heat transfer limited regime

Reaction Calorimetry in Continuous Flow Mode: A New Approach for the Thermal Characterization of High Energetic and Fast Reactions

Prediction and innovation of sustainable continuous flow microwave processing based on numerical simulations: A systematic review

The Chapman Rearrangement in a Continuous-Flow Microreactor

Optimized design of macro‐microreactor for scale‐up of liquid–liquid chemical processes

Experimental and Computational Investigation of Heat Transfer in a Microwave-Assisted Flow System

Compact Microwave Continuous-Flow Heater

Microwave Intensified Synthesis: Batch and Flow Chemistry.

Development and Scale-Up of a Continuous, High-Pressure, Asymmetric Hydrogenation Reaction, Workup, and Isolation

Continuous Microwave-Assisted Gas–Liquid Segmented Flow Reactor for Controlled Nucleation and Growth of Nanocrystals

Manipulation of gas-liquid-liquid systems in continuous flow microreactors for efficient reaction processes

Efficiency, Monitoring and Control of Microwave Heating Within a Continuous Flow Capillary Reactor

On-line monitoring of continuous flow chemical synthesis using a portable, small footprint mass spectrometer

Synthesis and post-processing of nanomaterials using microreaction technology

Experimental Study on Reactor Scale-Up for Microwave-Assisted Pyrolysis of Methyl Ricinoleate

A platform for automated nanomole-scale reaction screening and micromole-scale synthesis in flow

Highly modular PDMS microwave-microfluidic chip reactor for MAOS applications