Abstract:By employing carefully controlled processing methods, a large amount of porosity (>70vol%) was introduced in ceramic materials derived from preceramic polymers (silicone resins) after pyrolysis at 1000–1200°C in inert atmosphere. The resulting components have a bulk density ranging from ∼250 to 950kg/m3. Three main fabrication methods have here been employed: (1) direct foaming of a solution of a thermosetting silicone resin in a suitable solvent (with or without the addition of polyurethane precursors), acting also as a blowing agent; (2) the use of sacrificial fillers that decompose during pyrolysis, consisting in polymeric microbeads; (3) the mixing of preceramic polymers possessing different characteristics, in particular ceramic yield, depending on their molecular structure. In addition to that, several methods for developing micro- or meso-pores within the resulting SiOC macro-porous ceramics were explored, with the aim of fabricating components with hierarchical porosity. These include a controlled thermal treatment, the addition of fillers with a high specific surface area (SSA), the deposition of zeolites or meso-porous silica coatings, the infiltration with aerogels, selective etching of the SiOC material and the in situ formation of C-based nanostructures. Depending on the fabrication procedure adopted, cells with an average size ranging from the micrometer to the millimeter were obtained. All these processes are simple, economical and versatile, and large bodies with various shapes (tubes, plates, blocks) can be produced, possessing a wide range of morphologies and properties. Compression strength, flexural strength and Young's modulus vary with the morphology and density of the porous components. It is also possible to add to the preceramic polymers some filler powders, for instance possessing electrical conductivity or magnetic properties, leading to the production of functional cellular ceramics.

Whole ceramic-like microreactors from inorganic polymers for high temperature or/and high pressure chemical syntheses.

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

Ceramic microreactors for heterogeneously catalysed gas-phase reactions

Fabrication of Ceramic Microcomponents and Microreactor for the Steam Reforming of Ethanol

A pressure-tolerant polymer microfluidic device fabricated by the simultaneous solidification-bonding method and flash chemistry application.

Miniemulsion Template Polymerization to Prepare a Sub-Micrometer Porous Polymeric Monolith with an Inter-Connected Structure and Very High Mechanical Strength

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Engineering porosity in polymer-derived ceramics

Customized Nanostructured Ceramics via Microphase Separation 3D Printing

Synthesis Of Cross-Linked Polymer Microspheres And Pyrolysis Conversion To Polymer-Derived Ceramics

Polymeric Microfluidic Devices Fabricated Using Epoxy Resin for Chemically Demanding and Day-Long Experiments

One-pot microfluidic fabrication of micro ceramic particles

Highly modular PDMS microwave-microfluidic chip reactor for MAOS applications

Fabrication of a Monolith Reactor in a Copper Tube by Polymerization of Acetylene for Flow Catalysis

Study on Process of Micro Ceramic Structure and Micro Ceramic Reactor Fabrication

Titania and alumina sol-gel-derived microfluidics enzymatic-reactors for peptide mapping: design, characterization, and performance

Easy-to-perform and cost-effective fabrication of continuous-flow reactors and their application for nanomaterials synthesis

A novel processing approach for free-standing porous non-oxide ceramic supports from polycarbosilane and polysilazane precursors

Fabrication of SiCN MEMS by photopolymerization of pre-ceramic polymer

A High Integration 3D Temperature Controllable Micro-Reactor Fabricated by Femtosecond Laser Wet Etching