Abstract:Ceramic materials have good temperature and corrosion resistance, which is one of the ideal materials used in microchannel catalyst support for medium and high temperature catalytic reaction. Three-dimensional (3D) flow field structure is the most potential microchannel structure due to its high efficiency of mass and heat transfer . However, ceramic materials are hard and brittle, and the size of microchannel structures are small. It is a great challenge to construct a ceramic based microchannel catalyst support with a complex 3D flow field by traditional processing methods. In this paper, a 3D staggered flow field microchannel with the width of 450 μm and the depth of 1500 μm was designed and processed by diamond wire sawing. The mass and heat transfer properties of straight microchannel (SM), micro-column array (MA) and 3D staggered microchannel (3DSM) were compared by simulation. The effects of different windward angles (60°, 90° and 120°) on the performance of mass and heat transfer in 3D flow field were analyzed. The simulation results showed that the performance evaluation criteria ( PEC ) of 3DSM120° was 1.37, which meant better performance of heat and mass transfer than SM and MA. And the PEC of 3DSM structure was increased from 1.25 to 1.37 with the windward angle increasing from 60° to 120°. The pressure drop characteristics and hydrogen production performance of the microchannel catalyst support with different structures (SM, MA, 3DSM) were tested. The experimental results showed that the 3DSM had a good hydrogen production performance of methanol steam reforming (MSR) with the inlet flow rate of 1.5 ml/h at 300 °C. The methanol conversion rate was 99.43%, which was 15.41% and 6.20% higher than that of SM and MA, respectively, due to its better performance of mass and heat transfer.

Ceramic microreactors for heterogeneously catalysed gas-phase reactions

Uncatalyzed Oxidation of Cyclohexane in the Microchannels

Direct ink writing of Pd-Decorated Al<sub>2</sub>O<sub>3</sub> ceramic based catalytic reduction continuous flow reactor

Whole ceramic-like microreactors from inorganic polymers for high temperature or/and high pressure chemical syntheses.

Multi-channel ceramic catalytic membrane microreactors for highly efficient heterogeneous catalysis

High pressure microreactor for minute amounts of catalyst on planar supports: a case study of CO2 hydrogenation over Pd0.25Zn0.75Ox nanoclusters

Scalable Thin-Layer Membrane Reactor for Heterogeneous and Homogeneous Catalytic Gas–liquid Reactions

Robust Joule-heating ceramic reactors for catalytic CO oxidation

Catalytic mixed conducting ceramic membrane reactors for methane conversion

Ion–Conducting Ceramic Membrane Reactors for the Conversion of Chemicals

The Efficient Catalytic Microsystem with Halogen-Free Catalyst for the Intensification on CO2 Cycloaddition

A Microfluidic Device for Conducting Gas-Liquid-Solid Hydrogenation Reactions

Highly modular PDMS microwave-microfluidic chip reactor for MAOS applications

Development of ceramic-based 3D staggered microchannel catalyst support used in MSR microreactor for hydrogen production

Direct ink writing of Pd-Decorated Al2O3 ceramic based catalytic reduction continuous flow reactor

PVB/PEG-Based Feedstocks for Injection Molding of Alumina Microreactor Components

Microstructured gas-liquid-(solid) interfaces: A platform for sustainable synthesis of commodity chemicals

Pickering-Droplet-Derived MOF Microreactors for Continuous-Flow Biocatalysis with Size Selectivity

Functional silica monoliths with hierarchical uniform porosity as continuous flow catalytic reactors

Micro Interfacial Effect: the Stability of Catalytic Activity under Gas-Liquid Reaction Pressure Changes