Abstract:Fiber-reinforced polymer (FRP) composites modified with ceramic fillers have excellent thermal stability at high temperatures and are applied in aeronautical and aerospace fields. The effect of strain rate on their mechanical behavior at different temperatures (corresponding to different states of FRP composites) is of interest. In this study, dynamic and quasi-static compressive tests of a kind of ceramifiable polymer composites, B 4 C-talc modified high-silica/boron-phenolic (B 4 C-talc_HS/BPh) composites, were examined at 25–1000 °C. A high-temperature split Hopkinson pressure bar with a double-synchronous assembled system was employed to carry out dynamic tests. During the tests, high-speed camera was employed to monitor the progressive failure process, and the failure morphology was examined using an optical microscope. The tests show that the compressive strength decreases with increasing temperature to 600 °C at both low and high strain rates. However, it is found for the first time that the compressive strength increases obviously at 800–1000 °C due to the ceramifiable transition at a high strain rate. Moreover, the influence of temperature and loading rate on the compressive failure behavior of B 4 C-talc_HS/BPh composites was systematically investigated. Shear force dominated the failure under dynamic load at 25–1000 °C, while it was 25–450 °C under quasi-static load. Piece-wise models are developed to describe the temperature and strain-rate dependent evolution behavior of the compressive strength. This research provides basic experimental data on the mechanical properties of B 4 C-talc_HS/BPh composites, which can inform the design, evaluation of integrity, and reliability of thermal protection structures.

Compressive Behaviors of Continuous Carbon Fiber Reinforced Silicon Carbide Composites at High Temperature and High Strain Rate

Compressive Behavior of C/SiC Composites over a Wide Range of Strain Rates and Temperatures

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 1800 °C in Air

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 2300 °C

High-temperature tensile behavior of 3D SiC/SiC composites

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Evolution of strain-rate dependent compressive failure behavior of ceramifiable FRP composites at high temperature conditions

Strain Rate Effect on Mechanical Properties of 3D Needle-Punched C/C Composites at Different Temperatures

Experimental Study of High-Temperature Tensile Mechanical Properties of 3D Needled C/C–SiC Composites

Compressive experimental method and properties of C/C composites under ultra-high temperature environment

Properties evolution and damage mechanism of SiC/SiC composites after thermal shock at 1300 °C

Effects of temperature and strain rate on impact compression behaviors of three-dimensional carbon fiber/epoxy braided composites

High-temperature Flexural Mechanical Properties of SiC/SiC Composites

Mechanical properties and microstructure evolution of 3D C f /SiBCN composites at elevated temperatures

The deformation behaviors of SiCp/7A04 composites at high temperatures

Deformability of a SiCw/6061Al composite during high strain rate compression at elevated temperatures

High temperature bending properties and failure mechanism of 3D needled C/SiC composites up to 2000 °C

Strain Rate and Temperature Effect on Mechanical Properties and Failure of 3D Needle-Punched Carbon/Carbon Composites under Dynamic Loading

In Situ X-ray Imaging and Numerical Modeling of Damage Accumulation in C/SiC Composites at Temperatures Up to 1200 ℃

Thermal Expansion Behavior of Carbon Fiber Reinforced Chemical-Vapor-infiltrated Silicon Carbide Composites from Room Temperature to 1400 °C

High-Temperature Fatigue Degradation Behaviors of a 3D Braided C/SiC with a Thin Interlayer in Different Dry Oxygen Atmospheres