Abstract:Carbon fiber reinforced ultra-high temperature ceramic (UHTC) composites, consisting of carbon fibers embedded in a UHTC-matrix or a C–SiC–UHTC-matrix, are deemed as the most viable class of materials that can overcome the poor fracture toughness and thermal shock resistance of monolithic UHTC materials, and also improve the oxidation resistance and ablation resistance of C/C and C/SiC composites at ultra-high temperatures. In this review, we summarize the different processing routes of the composites based on the UHTC introducing methods, including chemical vapor infiltration/deposition (CVI/D), precursor infiltration and pyrolysis (PIP), reactive melt infiltration (RMI), slurry infiltration (SI), in-situ reaction, hot pressing (HP), etc; and the advantages and drawbacks of each method are briefly discussed. The carbon fiber reinforced UHTC composites can be highly tailorable materials in terms of fiber, interface, and matrix. From the perspective of service environmental applications for engine propulsions and hypersonic vehicles, the material designs (mainly focusing on the composition, quantity, structure of matrix, as well as the architecture of carbon fibers, UHTCs and pores), their relevant processing routes and properties (emphasizing on the mechanical and ablation properties) are discussed in this paper. In addition, we propose a material architecture to realize the multi-function through changing the distribution of carbon fibers, UHTCs and pores, which will be an important issue for future development of carbon fiber reinforced UHTC composites.

Ultra-temperature performance characterization of additive manufactured diamond/SiC and carbon fiber/SiC composites

High-temperature tensile behavior of 3D SiC/SiC composites

Microstructure evolution and thermal conductivity of diamond/SiC composites after heat treatment

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 2300 °C

Fabrication and characterization of highly thermal conductive Si3N4/diamond composite materials

Tensile Properties of Two-Dimensional Carbon Fiber Reinforced Silicon Carbide Composites at Temperatures Up to 1800 °C in Air

Effect of diamond content on microstructure and properties of C/SiC-diamond composites

Influence of High-Temperature Oxidation and Test Conditions on the Dynamic Mechanical Properties of 2.5D SiCf/SiCm Composites

Preparation of diamond/SiC composites by the liquid silicon infiltration method and their microstructure and properties

Tensile Mechanical Behavior and Failure Mechanism of a Plain-Woven SiCf/SiC Composites at Room and Elevated Temperatures

Research on maximizing the diamond content of diamond/SiC composite

Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review

Effect of infiltration temperature on graphitization and properties of diamond/SiC composites with SiC matrix

High temperature bending properties and failure mechanism of 3D needled C/SiC composites up to 2000 °C

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Cf/SiC Ceramic Matrix Composites with Extraordinary Thermomechanical Properties up to 2000 °C

High-Temperature Properties of SiC-Si3N4 Particle Composites

Improved Bending Strength and Thermal Conductivity of Diamond/Al Composites with Ti Coating Fabricated by Liquid–Solid Separation Method

Study on the Mechanical Property of High‐Performance Silicon Carbide Fiber

Effects of different element coatings on the interface characteristics and thermal conductivity of vacuum-sintered diamond/Cu composites

Effects of the In Situ Growth of CNTs on Ti-Coated Diamond Surfaces on the Mechanical Properties of Diamond/Aluminum Composites