Fracture Failure Analysis and Bias Tearing Strength Criterion for PVDF Coated Biaxial Warp Knitted Fabrics

Jianwen Chen,Wujun Chen,Mingyang Wang,Bo Yao,Han Zhou,Bing Zhao,Jianhui Hu
2017-01-01
Abstract:This paper concerns the fracture failure and bias tearing strength criterion for a PVDF coated bi-axial warp knitted fabrics (BWKFs) widely used in air supported membrane structures (ASMSs). Central slit tearing tests were carefully conducted on bias specimens with seven off-axis angles, and the corresponding tearing properties, including failure behaviors and tearing strength criterion were discussed. Results show that coated bi-axial warp knitted fabrics are typical direction-depended materials, and their tearing characteristics vary greatly with the bias angles. Typical tearing stress-displacement curves of bias samples could exhibit four characteristic regions: a co-deformation region, a shear deformation region, a plateau region, and a post peak region. No matter what the orientation of the initial slit or the yarn is, the propagation is always parallel to the secondary yarns. For specimens with different bias angles, some obvious differences in tearing behaviors are observed in terms of maximum displacement, damage mode, curve slope, and number of stress peaks, and these differences could be attributed to the material orthotropy and different failure mechanism of constituent materials. Unlike results of tensile strength for most of woven fabrics, for the studied BWKF composite, there is a W-shaped relationship between tearing strength and bias angle, with a local strength peak at 45 degrees angle. The new tearing strength criterion proposed in the prior research is validated due to the strong agreements between the calculated and experimental results for the BWKF.
What problem does this paper attempt to address?