Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Beam phase monitor system design for 100 mev cyclotron

Design of rf front end for cavity beam position monitor based on ics *

Development of fiber beam loss monitor based on Cerenkov principle

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

RF Control Hardware Design for CYCIAE-100 Cyclotron

Preliminary Design of a Rf System for the 100 Mev Cyclotron

An Automatic Phase-Matching Technique of CYCIAE-100 Cyclotron

The Design of Magnetic Field Measurements System for CYCIAE-100

THE CONTROL SYSTEM DEDICATED FOR BEAM LINE OF PROTON RADIOGRAPHY TEST-STAND ON A 100 MeV CYCLOTRON CYCIAE-100 *

Physics design on the axial injection system and the central region of the l00MeV high intensity cyclone

Field Mapping System Design for the Superconducting Cyclotron CYCIAE-230

Beam Position and Phase Measurement System for the Proton Accelerator in ADS

Train probe for beam diagnostics of the SC200 superconducting cyclotron

THE DESIGN AND CONSTRUCTION OF STRIPPING PROBE SYSTEM FOR CYCIAE-100*

A Beam Phase and Energy Measurement Instrument Based on Direct RF Signal IQ Undersampling Technique

A beam phase and energy measurement system based on direct RF signal IQ under-sampling technology

Development of Radial Probe for CYCIAE-100

Development and Commissioning of the Beam Diagnostics for CIAE Proton Therapy Beamline System

Design and relative calibration of a beam profile measurement system for the SC200 superconducting cyclotron

THE HIGH ACCURACY RF PHASE DETECTOR RESEARCH FOR 200 MEV LINAC