Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Commissioning of RF system of the 200 MeV proton cyclotron

Construction Progress of Two Superconducting Cyclotrons for Proton Therapy and Proton Irradiation at CIAE *

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

The construction of the inner ion source for SC200 compact superconducting cyclotron

Developments for 230 MeV superconducting cyclotrons for proton therapy and proton irradiation

Research and Development of the SC230 Superconducting Cyclotron for Proton Therapy

Conceptual Design of the SC230 Superconducting Cyclotron for Proton Therapy

Quench Safety Simulation and Verification of Superconducting Coils for the SC200 Superconducting Cyclotron

Design of a 162.5 MHz Superconducting Radio-Frequency Quadrupole for High-Intensity Proton Acceleration

Design and Testing of an Internal Hot-Cathode-type PIG Ion Source for Superconducting Cyclotron

Train probe for beam diagnostics of the SC200 superconducting cyclotron

Field Mapping System Design for the Superconducting Cyclotron CYCIAE-230

Commissioning of the 7 MeV H<SUP>-</SUP> linac injector for a 200 MeV proton synchrotron

Design and Realization of a Single Klystron-Based Radio Frequency System for a Radio Frequency Quadrupole and a Drift Tube Linac

COMMISSIONING STATUS OF THE 3 MEV RFQ FOR THE COMPACT PULSED HADRON SOURCE ( CPHS ) AT TSINGHUA UNIVERSITY

DESIGN OF A 200MHZ PROTON RFQ

The beam commissioning of a CW high charge state heavy ion RFQ

A 2.45 Ghz Electron Cyclotron Resonance Proton Ion Source and A Dual-Lens Low Energy Beam Transport

Tuning and Cold Test of A Four-Vane Rfq with Ramped Inter-Vane Voltage for the Compact Pulsed Hadron Source

Design, Fabrication, and Beam Commissioning of A Continuous-Wave Four-Rod Rf Quadrupole