Abstract:According to the agreement between the Institute of Plasma Physics (IPP) of the Chinese Academy of Sciences in Hefei (China) and Joint Institute for Nuclear Research, Dubna, (Russia), the project of a superconducting isochronous cyclotron for proton therapy SC200 is developed at JINR. The cyclotron will provide acceleration of protons up to 200 MeV with maximum beam current of 1 μA. We plan to manufacture in China two cyclotrons: one will operate in Hefei cyclotron medical center the other will replace Phasotron in Medico-technical Center (MTC) JINR Dubna and will be used for further research and development of cancer therapy by protons. The results of testing will be used by ASIPP for a serial SC200 manufacturing. Now we present main parameters of cyclotron and first simulation results of magnetic, accelerating systems and beam dynamics. INTRODUCTION The Medico-technical complex (MTC) JINR annually treated at the proton beam more than 100 people. For treatment MTC uses proton beam with energy upto 200 MeV specialized mainly on treatment of head localizations. The 200 MeV final energy has been chosen for SC200 cyclotron based on the experience of work of the MTC JINR and statistics for necessary depth of treatment provided by HIMAC (Japan) concerning the treated patients from 1995 to 2001 (see Fig.1) [1]. Figure 1: Distribution of maximum depths in HIMAC [1]. The proton beam with energy 200 MeV can irradiate all of the tumor localizations with a maximum depth of 25 cm. SC200 cyclotron will also be used for eye melanoma treatment at energies 60-70 MeV after degrading beam energy. Degrading the 200 MeV energy to 60-70 MeV would provide better beam quality compared to degrading from conventional energy 250 MeV. Taking into account the fact, that the size and cost of the cyclotron are approximately determined by the maximum proton energy, it was decided to limit the maximum proton energy to 200 MeV. Figure 2: View of the SC200 cyclotron. SC200 is an isochronous superconducting compact cyclotron. Superconducting coils will be enclosed in cryostat, all other parts are warm. Internal ion source of PIG type will be used. It is a fixed field, fixed RF frequency and fixed 200 MeV extracted energy proton cyclotron. Mean magnetic field of the cyclotron will be in the range of 2.9T-3.5T (center-extraction). Extraction will be organized with an electrostatic deflector and magnetic channels. Currently for proton acceleration we are planning to use 2 accelerating RF cavities, operating on the 2 harmonic mode. TUPMR016 Proceedings of IPAC2016, Busan, Korea ISBN 978-3-95450-147-2 1262 C op yr ig ht © 20 16 C C -B Y3. 0 an d by th e re sp ec tiv e au th or s 04 Hadron Accelerators A13 Cyclotrons MAGNET SYSTEM OF CYCLOTRON SC-200 The magnet modelling has been performed in 2D POISSON code, 3D ANSOFT MAXWELL and VECTOR FIELDS TOSCA software were used for optimization of the magnet design. The results of simulation of the SC200 magnetic system are described in details in [2]. The magnet’s main parameters are presented in the Table 1. Table 1: Parameters of the Magnet System of the SC200 Cyclotron Magnet type Compact, SC coil, warm yoke Pole diameter (m) 1.24 Magnet diameter (m) 2.2 Magnet height (m) 1.22 Hill gap, max/min (m) 0.04-0.005 Valley gap, max/min (m) 0.6/0.53 Yoke material St.1010 Extraction radius (m) 0.6 Average magnetic field (Ro/Rextr.) (T) 2.9/3.5 Excitation current (1 coil) (A*turns) 750 000 Magnetic field in the coil (T) max. 4.5 Cryostat and coils weight (t) 5 Total magnet weight (t) 30 Profiling of the pole shape and vertical profile of the sectors was used to shape the required isochronous magnetic field. Figure 3: View of the computer model of the magnet with accelerating cavities. Figure 4: Deviation dB of average magnetic field from isochronous one and RF phase of the beam versus orbit average radius. The difference between fields was calculated using a deviation of proton orbital frequency from the resonance value 45 MHz. Starting phase 20oRF was assumed in order to provide the beam axial focusing in central region of the cyclotron. In principle, the proton is extracted at 170 kV/cm, but trajectory seems located too long in the edge-defocusing field. Simulation of extraction for the bunch of protons is needed to define required parameters of focusing magnetic channels. Figure 5: Scheme of the beam extraction from SC200. 3D simulations of the central region and beam dynamic simulations are presented in the report [3] at this conference. ACCELERATION SYSTEM Magnetic field modelling and beam dynamics have determined orbital frequency of the ions equal to about 45 MHz. To operate on 2-th harmonic, the RF system has to achieve frequency of 90 MHz. We are planning to use two normal conducting RF cavities for ion beam acceleration in the SC200 cyclotron. The geometry of the RF cavity is restricted by the size of the valley of the magnet. We have fitted the double gap delta cavity inside the valley of the magnet. Azimuth extension of the cavity (between middles of accelerating gaps) is 50 degrees. We have chosen the accelerating gap to be equal to 7 degrees. Proceedings of IPAC2016, Busan, Korea TUPMR016 04 Hadron Accelerators A13 Cyclotrons ISBN 978-3-95450-147-2 1263 C op yr ig ht © 20 16 C C -B Y3. 0 an d by th e re sp ec tiv e au th or s Main parameters of the RF system are presented in Table 2. Table 2: Parameters of Accelerating System

Research and Development of the SC230 Superconducting Cyclotron for Proton Therapy

Conceptual Design of the SC230 Superconducting Cyclotron for Proton Therapy

Construction Progress of Two Superconducting Cyclotrons for Proton Therapy and Proton Irradiation at CIAE *

Research and Development of a Compact Superconducting Cyclotron SC200 for Proton Therapy

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Developments for 230 MeV superconducting cyclotrons for proton therapy and proton irradiation

The construction of the inner ion source for SC200 compact superconducting cyclotron

Superconducting Coil System R&D for a 230-Mev Superconducting Cyclotron

Computer Modeling of Magnet for SC200 Superconducting Cyclotron

Commissioning of RF system of the 200 MeV proton cyclotron

Beam Tracking Simulation for SC200 Superconducting Cyclotron

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Design and Construction of the Main Magnet for a 230-MeV Superconducting Cyclotron

Innovative 20-MeV Superconducting Cyclotron for Medical Applications

Investigation and quantitative simulation of beam physics for 230 MeV SC cyclotron under construction at CIAE

Design and Research of Magnetic Field Mapping System for SC200

Design and Testing of an Internal Hot-Cathode-type PIG Ion Source for Superconducting Cyclotron

Development of a Zero Rate Evaporation Cryogenic System for 200 MeV Proton Cyclotron

Magnetic Field Optimization and Tolerance Study of a Medical Superconducting Cyclotron

Magnetic Field Measurement, Shimming and Processing for 230 MeV Superconducting Cyclotron Main Magnet

Optimization and Experiment Progress on Electrostatic Deflector of SC200 Superconducting Proton Cyclotron