Abstract:Bismuth ferrite nano‐ and microcrystals were prepared by a facile molten salt technique in two kinds of molten‐salt‐based systems (NaCl–KCl and NaCl–Na2SO4). In the NaCl–KCl salt system, a systematic study indicating the effects of process parameters (e.g., calcination temperature, holding time as well as the molten salt ratios) on the bismuth ferrite formation mechanism and structural characteristics is reported. The results show that almost pure phase BiFeO3 powders with minimum impurity phase of Bi2Fe4O9 were synthesized at temperatures of 700°C–800°C, whereas high calcination temperature (e.g., 900°C) resulted in the formation of almost pure phase Bi2Fe4O9 powders. The prolonged holding time increased the particle size via the Ostwald ripening mechanism; however, there was little effect on the particle morphology. Similar phenomenon occurred as increasing the molten salt ratios. In the NaCl–Na2SO4 salt systems, it is found that low NP‐9 (nonylphenyl ether, NP‐9) surfactant content (0–5 mL) led to the formation of almost pure phase BiFeO3 powders, whereas high NP‐9 surfactant content (e.g., 20 mL) resulted in pure phase Bi2Fe4O9 powders. The average particle size of the BiFeO3 powders was decreased as increasing the NP‐9 surfactant content, whereas their morphologies did not change significantly. Because of the simplicity and versatility of the approach used, it is expected that this methodology can be generalized to the large‐scale preparation of other important transitional metal oxides with controllable sizes and shapes.

Molten Salt Synthesis, Formation Mechanism, and Oxidation Behavior of Nanocrystalline HfB 2 Powders

Molten Salt Synthesis of Bismuth Ferrite Nano‐ and Microcrystals and Their Structural Characterization

Fabrication of High‐purity HfSi2 Powder Via Molten Salt‐assisted Magnesium Thermal Reduction

Molten Salt Synthesis of ZnNb{sub 2}o{sub 6} Powder

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Low temperature synthesis of high‐entropy (Hf0.2Ti0.2Mo0.2Ta0.2Nb0.2)B2 powders combined with theoretical forecast of its elastic and thermal properties

Molten salt synthesis of orthorhombic CrB and Cr2AlB2 ceramics

Synthesis of ZnO Nano-crystal Powder by Molten Salt Method

Ultrasound-Assisted Liquid-Phase Synthesis and Mechanical Properties of Aluminum Matrix Nanocomposites Incorporating Boride Nanocrystals

Molten-salt Synthesis of BaTiO3 Powders and Their Atomic-Scale Structural Characterization

Synthesis of superfine high-entropy metal diboride powders

Synthesis of Submicrometer HfB2 Powder and Its Densification

Synthesis of Nano Sized Cr2AlC Powders by Molten Salt Method

Key to Enhance Thermoelectric Performance by Controlling Crystal Size of Strontium Titanate

Synthesis Of Nio Nano-Crystal Powders By Molten Salt Method

Ternary-layered Cr2AlB2 synthesized from Cr, Al, and B powders by a molten salt-assisted method

Molten salt synthesis of rod-like tungsten bronze niobate particles

The Structure, Morphology and Magnetic Properties of Sr-ferrite Powder Prepared by the Molten-Salt Method

Molten salt synthesis of Ni 0.5Zn 0.5Fe 2O 4 ferrites

Molten Salt Synthesis and High-Performance of Nanocrystalline Li-rich Cathode Materials

Synthesis and Magnetic Properties of Single-Crystalline BaFe12O19 Nanoparticles