Abstract:As electronics become lighter, shorter and more complex, the potential damage to integrated circuits (ICs) from electrostatic discharge (ESD) becomes more severe. In many applications, high voltages will result in high electric fields and high current densities in miniaturized components, which can lead to gate oxide breakdown of circuit components and thermal damage in ICs. Therefore, ESD protection circuits are added inside the electronic product in order to prevent the above damage, but the area of the protection cell should not be too large, otherwise a large proportion of the IC manufacturing cost is spent on the protection circuit. In this paper, we investigate how to improve the ESD protection of the designed high-voltage components through TSMC’s 0. 1S-micron BCD HV process. The sample structures of this work all use high-voltage N-channel laterally diffused MOSFETs (LDMOS), and the I/O protection components can be improved by this protection architecture. First, the ESD robustness of the device is enhanced by embedding a Schottky diode in the bulk end of the nLDMOS. The Schottky diode is parasitized horizontally at the body terminal. Since the parasitic Schottky diode is at the body electrode of the device, the parasitic BJT capability is enhanced, making it easier to trigger the conductivity of the device. Therefore, the new components $\mathrm{V}_{\mathrm{t}i}$ and $\mathrm{V}_{\mathrm{h}}$ values decrease (because the horizontal parasitic Schottky is reversed so the decreasing is obvious), so that the high-voltage ESD protection components have a better performance under ESD events, this design also makes the anti-ESD capacity $\mathrm{I}_{\mathrm{t}2}$ significantly increased. In the case of the body-end horizontal (reversed) embedded Schottky element, the largest $\mathrm{I}_{\mathrm{t}2}$ is found on the $\mathrm{R}\mathrm{e}\mathrm{f}_{-}8\mathrm{S}_{-}\mathrm{B}_{-}8$ device, whose $\mathrm{I}_{\mathrm{t}2}$ improvement rises up to 4. 529A, an significant increase of 244.41% was achieved as compared with the reference sample.

Mix‐mode Forward‐biased Diode with Low Clamping Voltage for Robust ESD Applications

Improvement on Diode String Structure for 65-Nm RF ESD Protection

Robust and area-efficient nLDMOS-SCR with waffle layout structure for high-voltage ESD protection

A novel power-clamp assisted complementary MOSFET for robust ESD protection.

A Modified LDMOS Device with Improved ESD Protection Performance

ESD-Performance Enhancement of Circular Ultra-High-Voltage 300-V N-Channel Lateral-Diffused MOSFETs by Source/Drain Embedded Schottky Diodes

An Area-Efficient LDMOS-SCR ESD Protection Device for the I/O of Power IC Application

High Area Efficiency Bidirectional Silicon-Controlled Rectifier for Low-Voltage Electrostatic Discharge Protection

Mos Controlled Diodes - A New Power Diode

A Novel Dual-Directional DTSCR in Twin-Well Process for Ultra-Low-voltage ESD Protection

A Robust Scalable ESD Protection Device integrating Drain side Floating P+ Diffusion with tunable ESD Design Window and effective Latch-up immunity for High-Voltage Power Clamp applications

Design Analysis of a Novel Low Triggering Voltage Dual Direction SCR ESD Device in 0. 18μm Mixed Mode RFCMOS Technology

RC-Embedded LDMOS-SCR with High Holding Current for High-Voltage I/O ESD Protection

A Novel Substrate-Optimized GGNMOS for Low-Voltage ESD Protection in 65 nm CMOS Process

Improved LDMOS for ESD Protection of High Voltage BCD Process

New Electrostatic Discharge Protection Device for VBO High Speed Chip

Investigation on Bi-directional SCR ESD Protection Devices in a 0.18 μm RF CMOS Process

A Novel Double RESURF LDMOS with Optimized ESD Robustness

Enhanced ESD-Capability of High-Voltage 32 V N-Channel LDMOSs with the Body-Side Hetero-Junction Structure

Novel Diode Structures and ESD Protection Circuits in a 1.8-V 0.15-Μm Partially-Depleted SOI Salicided CMOS Process

A Novel Diode String Triggered Gated-Pin Junction Device for Electrostatic Discharge Protection in 65-Nm Cmos Technology