Abstract:Nd3+-doped three-level (4F3/2-4I9/2) fiber lasers with wavelengths in the range of 850-950 nm are of considerable interest in applications such as bio-medical imaging and blue and ultraviolet laser generation. Although the design of a suitable fiber geometry has enhanced the laser performance by suppressing the competitive four-level (4F3/2-4I11/2) transition at ∼1 µm, efficient operation of Nd3+-doped three-level fiber lasers still remains a challenge. In this study, taking a developed Nd3+-doped silicate glass single-mode fiber as gain medium, we demonstrate efficient three-level continuous-wave lasers and passively mode-locked lasers with a gigahertz (GHz) fundamental repetition rate. The fiber is designed using the rod-in-tube method and has a core diameter of 4 µm with a numerical aperture of 0.14. In a short 4.5-cm-long Nd3+-doped silicate fiber, all-fiber CW lasing in the range of 890 to 915 nm with a signal-to-noise ratio (SNR) greater than 49 dB is achieved. Especially, the laser slope efficiency reaches 31.7% at 910 nm. Furthermore, a centimeter-scale ultrashort passively mode-locked laser cavity is constructed and ultrashort pulse at 920 nm with a highest GHz fundamental repetition is successfully demonstrated. Our results confirm that Nd3+-doped silicate fiber could be an alternative gain medium for efficient three-level laser operation.

Three-level all-fiber laser at 915 nm based on polarization-maintaining Nd<SUP>3+</SUP>-doped silica fiber

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber

High-peak-power nanosecond pulse laser at 915 nm based on all-fiber structure

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence

Efficient 2075-nm laser emission from Ho3+-doped fluorotellurite glass in a compact all-fiber structure

All-Solid Silicate Photonic Crystal Fiber Laser with 13.1 W Output Power and 64.5% Slope Efficiency

Direct coordination engineering manipulates fluorescence intensity inversion leading to ~ 900 nm high-power lasing in Nd3+-doped fiber

Ultrafast Fiber Laser at 0.9 Μm with a Gigahertz Fundamental Repetition Rate by a High Gain Nd3+-doped Phosphate Glass Fiber.

Femtosecond 905nm-940nm band Nd:fiber laser

3 W Narrow-Linewidth Ultra-Short Wavelength Operation Near 1707 Nm in Thulium-Doped Silica Fiber Laser with Bidirectional Pumping

High-efficiency longwave 2085 nm laser output in low-loss Ho 3+ -doped fluorotellurite glass fiber by 1976 nm in-band pumping

High-power, high-efficiency single-frequency DBR fiber laser at 1064 nm based on Yb3+-doped silica fiber

Femtosecond all-polarization-maintaining Nd fiber laser at 920 nm mode locked by a biased NALM

Design, fabrication and thermal annealing of Nd-doped all-solid anti-resonant silicate fibers for 0.9 μm laser

Single-frequency DBR Nd-doped fiber laser at 1120 nm with a narrow linewidth and low threshold

Local-cooled watt-level Nd-doped phosphate single-mode fiber laser

Gain-Switched Er-Doped Fluoride Fiber Laser at ~3.75 μm

Paving way for fabrication of silica-based single -frequency seed laser: Ultrahighly Yb-doped optical fibers via sol-gel method combined with silica tube inner wall coating and fusion-tapering technique

Efficient laser operation with low loss Nd3+-doped phosphate glass fiber under direct pumping

Yb-Doped Aluminophosphosilicate Laser Fiber

115-Mhz Linear NPE Fiber Laser Using All Polarization-Maintaining Fibers