Abstract:A large core size and bending resistance are very important properties of mid-infrared energy transfer fibers, but large core sizes usually lead to the deterioration of bending properties. A negative-curvature nested node-free anti-resonant hollow-core fiber (AR-HCF) based on quartz is proposed. It was made by adding a nested layer to a previous AR-HCF design to provide an additional anti-resonance region while keeping the gap between adjacent tubes strictly correlated with the core diameter to produce a node-free structure. These features improve the fiber's bending resistance while achieving a larger core diameter. The simulation results show that the radial air–glass anti-resonant layer is increased by the introduction of the nested anti-resonant tube, and the weak interference overlap between the fiber core and the cladding mode is reduced, so the fiber core's limiting loss and sensitivity to bending are effectively reduced. When the capillary wall thickness t of the fiber is 0.71 μm, the core diameter D is 70 μm, the ratio of the inner diameter of the cladding capillary to the core diameter d/D is 0.62, the diameter of the nested tube is d0 = 29 μm, the fiber has a lower limiting loss at the wavelength of 2.79 μm, and the limiting loss is 3.28 × 10−4 dB/m. At the same time, the optimized structure also has good bending resistance. When the bending radius is 30 mm, the bending loss is only 4.72 × 10−2 dB/m. An anti-bending low-loss micro-structure hollow fiber with a bending radius of less than 30 mm was successfully achieved in the 2.79 μm band. An anti-bending low-loss anti-resonant hollow-core fiber with this structure constitutes a reliable choice for the light guiding system of a 2.79 μm band Er, Cr: YSGG laser therapy instrument.

Design, fabrication and thermal annealing of Nd-doped all-solid anti-resonant silicate fibers for 0.9 μm laser

Coordination engineering in Nd3+-doped silica glass for improving repetition rate of 920-nm ultrashort-pulse fiber laser

Nd3+ Doped Multi-Component Phosphate Glass Multi-Material Fiber for a 1.05 Μm Laser

Nd3+-doped Double-Clad Fluoro-Sulfo-phosphate Fiber for Compact Kilohertz-Linewidth Single-Frequency Laser

Yttrium Aluminosilicate (YAS) Fiber with Heavily Doped of Nd for Single Frequency Laser

Mid-infrared all-solid anti-resonant chalcogenide fiber with large mode area and coupling tolerance

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber

Mid-Infrared 2.79 μm Band Er, Cr: Y3Sc2Ga3O12 Laser Transmission Anti-Bending Low-Loss Anti-Resonant Hollow-Core Fiber

Broadband Near-Infrared Amplified Spontaneous Emission of Er3+-doped Germanate Glass Fiber.

Direct coordination engineering manipulates fluorescence intensity inversion leading to ~ 900 nm high-power lasing in Nd3+-doped fiber

Boosting the branching ratio at 900 nm in Nd3+ doped germanophosphate glasses by crystal field strength and structural engineering for efficient blue fiber lasers

915 Nm All-Fiber Laser Based on Novel Nd-doped High Alumina and Yttria Glass @ Silica Glass Hybrid Fiber for the Pure Blue Fiber Laser.

Broadband 27 Μm Amplified Spontaneous Emission of Er^3+ Doped Tellurite Fibers for Mid-Infrared Laser Applications

Design and fabrication of a chalcogenide hollow-core anti-resonant fiber for mid-infrared applications.

Three-level all-fiber laser at 915 nm based on polarization-maintaining Nd<SUP>3+</SUP>-doped silica fiber

All-Solid Silicate Photonic Crystal Fiber Laser with 13.1 W Output Power and 64.5% Slope Efficiency

Precisely controllable fabrication of Er3+-doped glass ceramic fibers: novel mid-infrared fiber laser materials

Preparation of Er:YAG Crystal-Derived All-Glass Silica Fibers For a 1550-nm Single-Frequency Laser

Ag Nanoparticles Embedded Er3+/Yb3+ Co-Doped Phosphate Glass Single-Mode Fibers

Broadband 2.7 μm amplified spontaneous emission of Er 3+ doped tellurite fibers for mid-infrared laser applications