Abstract:Fiber lasers (FLs) with excellent beam quality, high reliability and compact structure are urgently demanded in the fields of national security and scientific research, such as high-power laser, free-space optical communication, and gravitational wave detection. These applications rely on rare-earth-doped high-gain glass fibers, which play critical roles in FLs. However, the rare earth solubility of commercial silica glass (similar to 10(19) ions/cm(3)) is restricted by its rigid structures. Thus, the active fiber fabricated by silica glass typically has low gain, which becomes a challenge for developing high-performance FLs. Phosphate-based glass is a promising candidate because it has higher solubility of rare earth (similar to 10(21) ions/cm(3)) and larger emission cross-section compared with silica glass. By incorporating fluoride and sulfate into phosphate matrix, the fluoro-sulfo-phosphate (FSP) glass that combines the favorable spectroscopic properties of fluoride and sulfate glasses with the advantages of phosphate glass can be derived. The addition of fluoride reduces the linear and nonlinear refractive indices of phosphate glass, which is advantageous for operating FLs. The maximum phonon energies of fluoride (similar to 500 cm(-1)) and sulfate (similar to 990 cm(-1)) are lower than that of phosphate (similar to 1200 cm(-1)). Therefore. sulfate and fluoride ions can tailor the local structures of rare earth and enhance radiative transition probability, leading to increased optical gain. Herein, this work systemically investigated the FSP glasses with the compositions of R2SO4-AlF3-RPO3/Zn(PO3)(2) (R=Li. Na. K). Their glass-forming regions were determined under the guidance of thermodynamic calculation method. The dependence of properties on structure of the FSP glass was analyzed by solid-state nuclear magnetic resonance (NMR). Raman spectra, differential scanning calorimetry (DSC), durability test. etc. Then the luminescent properties of Er3+/Yb3+ co-doped FSP laser glasses were characterized. Optimized laser glass was fabricated into high-gain fibers and an FL has been demonstrated. The results illustrate that the glass-forming regions of FSP systems can be quickly determined based on the thermodynamic calculation. which provides an effective and predictive method for designing novel laser glasses. Incorporating Zn(PO3)(2) into FSP glass can enhance the interactions between cations and anions and increase the polymerization degree of glass structure, resulting in improved anti-crystallization ability and chemical durability, which is beneficial for preparing large-scale samples and drawing fibers. The Er3+/Yb3+ co-doped FSP laser glasses show excellent spectroscopic properties at similar to 1.5 mu M, which exhibit longer lifetime (5.9-7.5 ms), larger emission cross section (8.5 x10(-21) 9.0 x10(-21) cm(2)) and lower saturation intensity (1.0 x10(7) W m(-2)) than some phosphate, fluorophosphate and telluroborate laser glasses. Er3+/Yb3+ co-doped fiber based on FSP glass shows a net gain of 4.7 dB/cm@1535 nm. An FL with a threshold of similar to 50 mW and a slope efficiency of 11.3% has been demonstrated based on such fiber. Considering its high gain characteristics. the narrow-line-width single-frequency FL and high-repetition-rate ultrafast FL are expected to be realized further.

Nd3+-doped Double-Clad Fluoro-Sulfo-phosphate Fiber for Compact Kilohertz-Linewidth Single-Frequency Laser

Kilohertz-linewidth and Low-Threshold Single-Frequency All-Fiber Laser Utilizing Self-Developed Nd3+-doped Fluoro-Sulfo-phosphate Fiber

High-gain Fluoro-Sulfo-phosphate-based Active Fiber for Compact Low-Threshold Kilohertz-Linewidth Single-Frequency Fiber Laser

Erbium-doped fluoro-sulfo-phosphate high-gain laser fiber

Ultrafast Fiber Laser at 0.9 Μm with a Gigahertz Fundamental Repetition Rate by a High Gain Nd3+-doped Phosphate Glass Fiber.

Nd3+ Doped Multi-Component Phosphate Glass Multi-Material Fiber for a 1.05 Μm Laser

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber

Efficient 16 Μm Linearly-Polarized Single-Frequency Phosphate Glass Fiber Laser

Efficient laser operation with low loss Nd3+-doped phosphate glass fiber under direct pumping

400 Mw Ultrashort Cavity Low-Noise Single-Frequency Yb^3+-doped Phosphate Fiber Laser

Efficient 1.6 μm linearly-polarized single-frequency phosphate glass fiber laser

Single-mode laser output in a Yb 3+ -doped fluorophosphate fiber

Fluoro-sulfo-phosphate Fiber with Long-Wavelength Gain for an L-band Laser

Coordination engineering in Nd3+-doped silica glass for improving repetition rate of 920-nm ultrashort-pulse fiber laser

An Efficient Compact 300 Mw Narrow-Linewidth Single Frequency Fiber Laser at 15 Μm

Preparation of Nd3+-doped flurorzirconate glass laser fiber

Three-level all-fiber laser at 915 nm based on polarization-maintaining Nd<SUP>3+</SUP>-doped silica fiber

400 mW ultrashort cavity low-noise single-frequency Yb³⁺-doped phosphate fiber laser.

Yb-Doped Aluminophosphosilicate Laser Fiber

Ho3+-doped AlF3–TeO2-based Glass Fibers for 2.1µm Laser Applications