Abstract:Nd3+-doped three-level (4F3/2-4I9/2) fiber lasers with wavelengths in the range of 850-950 nm are of considerable interest in applications such as bio-medical imaging and blue and ultraviolet laser generation. Although the design of a suitable fiber geometry has enhanced the laser performance by suppressing the competitive four-level (4F3/2-4I11/2) transition at ∼1 µm, efficient operation of Nd3+-doped three-level fiber lasers still remains a challenge. In this study, taking a developed Nd3+-doped silicate glass single-mode fiber as gain medium, we demonstrate efficient three-level continuous-wave lasers and passively mode-locked lasers with a gigahertz (GHz) fundamental repetition rate. The fiber is designed using the rod-in-tube method and has a core diameter of 4 µm with a numerical aperture of 0.14. In a short 4.5-cm-long Nd3+-doped silicate fiber, all-fiber CW lasing in the range of 890 to 915 nm with a signal-to-noise ratio (SNR) greater than 49 dB is achieved. Especially, the laser slope efficiency reaches 31.7% at 910 nm. Furthermore, a centimeter-scale ultrashort passively mode-locked laser cavity is constructed and ultrashort pulse at 920 nm with a highest GHz fundamental repetition is successfully demonstrated. Our results confirm that Nd3+-doped silicate fiber could be an alternative gain medium for efficient three-level laser operation.

All-Solid Silicate Photonic Crystal Fiber Laser with 13.1 W Output Power and 64.5% Slope Efficiency

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

1386 nm continuous wave output from laser diode end-pumped 1386 nm Nd:YVO4 laser

Phosphate Single Mode Large Mode Area All-Solid Photonic Crystal Fiber With Multi-Watt Output Power

Phosphate Ytterbium-Doped Single-Mode All-Solid Photonic Crystal Fiber with Output Power of 13.8 W

Yb-Doped Aluminophosphosilicate Laser Fiber

Double-clad large-mode-area polarization-maintaining ytterbium doped photonic crystal fiber

Laser-Diode-Pumped Nd:YAP Single Crystal Fiber Laser

Three-level all-fiber laser at 915 nm based on polarization-maintaining Nd<SUP>3+</SUP>-doped silica fiber

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber

Study on Optical Characteristics of Nd:YVO4/YVO4 Composite Crystal Laser

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence

Cladded Optical Fiber Laser Made From A-Axis Nd : Mgo : Linbo3 Single Crystal Fiber With Mg-Ion Indiffusion

High-efficiency longwave 2085 nm laser output in low-loss Ho 3+ -doped fluorotellurite glass fiber by 1976 nm in-band pumping

Hybrid-structure 1018-Nm Monolithic Single-Mode Fiber Laser Producing High Power and High Efficiency

Ion-Doped Photonic Crystal Fiber Lasers

~1 µm laser output based on heterogeneous fiber with Yb3+-doped fluorophosphate core and phosphate cladding

High-power, high-efficiency single-frequency DBR fiber laser at 1064 nm based on Yb3+-doped silica fiber

Large-mode-area neodymium-doped all-solid double-cladding silicate photonic bandgap fiber with an index step of similar to 0.5%

High-power and high-energy coherent sources at 1.1-μm based on compact diode-end-pumped Nd:YAG crystal fiber lasers