Abstract:We propose a novel porous-core photonic crystal fiber (PCF) consisting of asymmetrical rectangular air holes in the core and six-ring hexagonal lattice circular air holes in the cladding for achieving low-loss polarization terahertz transmission in a wide frequency range. By assuming TOPAS as the host material, the finite element method (FEM) is used to investigate its properties. The near-zero flattened dispersion of −0.01±0.02 ps/THz/cm is achieved over a frequency range of 1.0–2.0 THz, as well as a high birefringence of 7.1 × 10<sup>−2</sup> which can be useful for polarization-maintaining applications. Also, critical parameters such as mode field distribution, effective material loss, confinement loss, and effective mode area are discussed in detail. Further, fabrication possibilities are discussed briefly by comparing recent work on similar waveguide structures.<strong>OCIS Codes:</strong> 040.2235 (Far infrared or terahertz), 060.4005 (Micro-structured fibers), 060.2420 (Fibers, polarization-maintaining), 160.5470 (Polymers).

Phosphate Ytterbium-Doped Single-Mode All-Solid Photonic Crystal Fiber with Output Power of 13.8 W

Phosphate Single Mode Large Mode Area All-Solid Photonic Crystal Fiber With Multi-Watt Output Power

Yb/Er co-doped phosphate all-solid single-mode photonic crystal fiber

Heavily Yb-doped phosphate large-mode area all-solid photonic crystal fiber operating at 990?nm

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

All-Fibre Ytterbium-Doped Photonic Crystal Fibre Laser with High Efficiency

All-Solid Silicate Photonic Crystal Fiber Laser with 13.1 W Output Power and 64.5% Slope Efficiency

Yb3+-doped Large-Mode-area Photonic Crystal Fiber Laser with 210 W Continuous-Wave Output Power

Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

40 W picosecond fiber amplifier with the large mode-area polarized crystal fiber

Double-clad large-mode-area polarization-maintaining ytterbium doped photonic crystal fiber

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

High-efficiency All-Fibre Optical Parametric Oscillator Based on Photonic Crystal Fibres Pumped by Ytterbium-Doped Fibre Laser

Highly Compact and Efficient Erbium-Doped Phosphate Fiber Amplifiers

Gain And Noise Characteristics Of Single-Mode Er3+/Yb3+ Co-Doped Phosphate Glass Fibers

A Quasi-Three-Level Acousto-Optics (AO) Q-Switched Yb-Doped Double Clad Photonic Crystal Fiber Laser

Advances in Silica-Based Large Mode Area and Polarization-Maintaining Photonic Crystal Fiber Research

Highly birefringent elliptical-hole photonic crystal fiber with squeezed hexagonal lattice.

Stress-Induced Polarization-Maintaining Large-Mode-Area Photonic Crystal Fibers With Deviation of the Single-Mode Transmission Band and Delocalization of Higher-Order Modes

High-efficiency cladding-pumped Er/Yb co-doped alumino-phosphosilicate fiber for an extended L-band amplification

Low Noise Single-Frequency Single-Polarization Ytterbium-Doped Phosphate Fiber Laser at 1083 Nm